1.
Analysis on Performance of Axial Throughwall Crack Pipeline Repaired by Sleeve
轴向穿透裂纹管道套管修复性能研究
2.
Elastic-Plastic Finite Element Analysis for Unequal-Diameter Tee Joint with Axial Through-wall Cracks at the Shoulder
焊制异径三通肩部轴向穿透裂纹弹塑性有限元分析
3.
(2) The method which used to build the unequal-diameter tee joint with axial through-wall crack has been established.
(2) 确定了肩部含轴向穿透裂纹焊制异径三通有限元模型的建立方法。
4.
Research on Reinforcement of Nozzle with Penetrated Crack at Intersecting Line
相贯线处含穿透裂纹接管的补强研究
5.
AN EXPERIMENTAL STUDY OF OUT-PLANE DISPLACEMENTFIELD NEAR THE TIP OF A THROUGH CRACKIN A PLATE UNDER BENDING
含穿透裂纹平板受弯时裂纹尖端离面位移场的实验研究
6.
Analysis of Fundamental Frequencies of Rotating Shafts with Transverse Crack;
含横向裂纹的转动轴的振动基频分析
7.
Analysis on the vibration characteristics of cracked beams subjected to axial force
轴向压力影响下裂纹梁振动特性分析
8.
Extensive through-thickness shear causes crack-tip necking.
大范围的穿透厚度剪切引裂纹顶端的颈缩。
9.
STRESS INTENSITY FACTORS FOR MULTI-FASTENER-HOLE STRUCTURES WITH MULTI-THROUGH-CRACKS
含多个穿透裂纹的多孔紧固件传载结构裂尖应力强度因子研究
10.
Elastic-Plastic Finite Element Analysis for Piping Elbow with Axial Inside Surface Cracks;
光滑弯管沿轴向内表面裂纹弹塑性有限元分析
11.
Failure Pressure Analysis of SG Tube with Axial Crack
蒸汽发生器含轴向裂纹传热管的失效压力分析
12.
Influence of transverse crack model on shafting's torsional shear stress
轴系横向裂纹模型对其扭转剪应力的影响
13.
Elastic-Plastic Fracture Analysis for Internal Axial Surface Half Elliptical Cracks in Oil & Gas Pipeline
油气管道内部轴向表面半椭圆裂纹弹塑性断裂分析
14.
FRACTURE AND RELIABILITY ASSESSMENT ON SUBMARINE PIPELINES WITH AXIAL SURFACE CRACKS
带轴向表面裂纹海洋管道的断裂计算与可靠性评估
15.
Ultimate strength analysis of central through-thickness cracked plate under complex load
中心穿透裂纹板在复杂载荷作用下的剩余极限强度分析
16.
Study on Calculation of Influence Function with Fracture Mechanics Analysis Method for Circumferential Through-Crack Pipe
含环向贯穿裂纹管道断裂力学工程方法影响函数的计算研究
17.
To ensure this, specimens must be of sufficient thickness so that a triaxial state of stress can exist at the flaw tip.
为此，试样必须足够厚，使裂纹顶端处于三轴向的应力状态。
18.
The Experimental Analysis of the Correction Factor of the SIF for the Transverse Surface Semi-Elliptic Crack of a Axle
轴表面横向半椭圆裂纹应力强度因子修正系数的实验分析