1.
Research on Welding Seam Spacing and Rod Wall Thickness Matching Characteristic of Coach Skeleton Joint
客车骨架接头的焊缝间距与杆件壁厚匹配特性研究
2.
No spalled paint exists at the plug weld and for a short distance each side of the plug welds.
在塞焊焊缝处及塞焊周围距离内无细漆碎屑存在。
3.
The deviatio n between torch and seam is calculated after image processing.
图象处理后计算焊枪和焊缝之间的偏差。
4.
Welding the welds which are stagger first, then is the straight ang long weld.
先焊错开的端焊缝，后焊直通长焊缝。
5.
Discussion on Pre-Cracking Spacing of Cement-Stabilized Crushed-Stone Base
水泥稳定碎石基层预锯缝间距的探讨
6.
Fracture toughness of heat-affected zone( HAZ) was between the base metal and weld metal.
焊接热影响区的断裂韧性介于母材和焊缝金属之间。
7.
The spcimens were machined such that plug weld was centered on the width of the specimen.
对试件进行了机加工以使塞焊焊缝位于试件宽度中间。
8.
Failure Reason for the Nickel-based Alloy Weld Intergranular Corrosion Test
镍基合金焊缝晶间腐蚀试验不合格原因浅析
9.
Spatial Position Visualization of Weld Defects Based on Secondary Development of Pro/E
基于Pro/E二次开发的焊缝缺陷空间位置可视化
10.
Region Integral Comparison Method and Its Algorithm Improvement in Seam-Tacking
焊缝跟踪中的区间积分比较法及其算法改进
11.
The reason analysis of leakage at welding seam of reheater tube supports in 660MW unit
660MW机组再热器管间支撑焊缝泄漏原因分析
12.
Experiment and Analysis for Welded Joint Anti-Intercrystalline Corrosion of 0cr18ni9 Steel
提高0Cr18Ni9钢焊缝抗晶间腐蚀性的试验及分析
13.
DC seam welder-"C"France Type.
直流缝焊机,"C"型。
14.
Elementary Analysis of Sustainment Modality for Preventing from Distortion in Welding Structural Part of Hydraulic Pressure Bracket
液压支架结构件焊接防变形支撑间距初论
15.
Fatigue Life Prediction for Fine Pitch Device Soldered Joints Based on Creep Model
基于蠕变模型细间距器件焊点疲劳寿命预测
16.
The research indicates that this method can control the welding time of a weld and that the stable and uniform weld formation is acquired.
研究结果表明：该方法能够实现对焊点焊接时间的实时控制，获得均匀稳定的焊缝成形。
17.
Investigates the influence of two cor es span and welding cur rent of lime tiannia type twin electrode on welding technology.
研究了钛钙型双电极焊条的两芯间距和焊接电流对单弧焊工艺的影响 .
18.
The Modification to Inside Weld Grinding Machine for JCOE Formed Longitudinal Submerged Arc Welded Pipe
JCOE直缝埋弧焊管内焊缝磨削机的改造