1.
The act of turning on or as if on a pivot.
转动，旋转运动在枢轴上或似乎在枢轴上转动的行为
2.
A short rod or shaft on which a related part rotates or swings.
枢，轴一根短杆或轴，相关的部分可在其上转动或摇摆
3.
The pin on which a gun carriage revolves.
炮架枢轴炮架转动用的枢轴
4.
The pinion gear is on the same shaft as the motor armature and rotates at the same speed.
小齿轮如马达电枢般在同一曲轴上，且以相同的速度转动。？
5.
"a door is turned on its pillar, and the hater of work on his bed."
门在枢纽转动，懒惰人在床上也是如此。
6.
As the door turns upon its hinges, So does the sluggard upon his bed.
14门在枢纽上转动，懒惰人在床上也是如此。
7.
As the door turneth upon his hinges, so doth the slothful upon his bed.
14门在枢纽转动，懒惰人在床上也是如此。
8.
As the door turns on its hinges, So does the sluggard on his bed.
箴26:14门在枢纽转动、懒惰人在床上也是如此。
9.
A metal pivot or journal at the end of a shaft or an axle, around which a wheel or other device turns.
轮轴，枢轴在车辕或车轴某端的枢轴或轴颈，车轮或其它装置绕其旋转
10.
"When the two shafts are at an angle to each other, the bearings in the yokes permit the yokes to swing around on the trunnions with each revolution."
当两轴相互处在同一角度上,主动轴转动时万向节叉上的轴承使万向节叉绕万向节十字轴摆动。
11.
the maximum movement available to a pivoted or reciprocating piece by a cam.
安装在枢轴上或作往复运动的部件，从凸轮、曲柄或偏心轮所得到或能得到的运动极限。
12.
A movable keel in a sailboat that can be pivoted upward to reduce the boat's draft in shallow water.
活动防浪板帆船上一活动龙骨，可以绕枢轴扯起以减少船在浅水的吃水深度
13.
But a camshaft driven directly by the crankshaft gear turns in the opposite direction.
但是凸轮轴被曲轴齿轮直接驱动，其将在相反方向上转动。
14.
A disk attached to the mandrel of a lathe to hold the work to be turned.
面板安装在车床活动芯轴上以使工件转动的盘
15.
In the engine, oil is supplied to crankshaft and camshaft journals rotating in their supporting bearings.
在发动机里，机油被供应到旋转在其支承轴内的曲轴和凸轮轴轴颈上。
16.
A pin or a bolt on which another part pivots.
枢轴，柱销，扣针在另一铆钉上的扣针或销子
17.
The steering wheel is mounted on a steering shaft that extends into the steering gear.
转向盘安装在转向轴上,转向轴延伸至转向器。
18.
To mount on, attach by, or provide with a pivot or pivots.
给…装枢轴装上或放置或提供一根或多根枢轴