1.
Lock washers external teeth
GB/T862.1-1987外齿锁紧垫圈
2.
Specifications for spring washers--Toothed lock and serrated lock washers
GB/T94.2-1987弹性垫圈技术条件齿形、锯齿锁紧垫圈
3.
Countersunk external toothed lock washer for assembly
GB/T9074.28-1988组合件用锥形锁紧垫圈
4.
Serrated lock washer external teeth for assembly
GB/T9074.27-1988组合件用外锯齿锁紧垫圈
5.
Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies
GB/T9074.9-1988十字槽沉头螺钉和锥形锁紧垫圈组合件
6.
Hexagon head bolt and serrated lock washer external teeth assemblies
GB/T9074.16-1988六角头螺栓和外锯齿锁紧垫圈组合件
7.
Cross recessed pan head screw and serrated lock washer external teeth assemblies
GB/T9074.2-1988十字槽盘头螺钉和外锯齿锁紧垫圈组合件
8.
Cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies
GB/T9074.10-1988十字槽半沉头螺钉和锥形锁紧垫圈组合件
9.
Flared type tube fittings--Back-up washer
GB/T5652-1985扩口式管接头锁紧螺母垫圈
10.
Lock rings with screw and circlip
GB/T885-1986带锁圈的螺钉锁紧挡圈
11.
A wide range of standard stampings, non-standard products, stainless steel washers, internal/ external teeth washers, rings, circlips for holes, circlips for shaft, other fasteners, fittings, seal washers and clamps主要生产各种标准件冲压件.各种非标产品.
不绣钢垫圈;内外齿垫圈;挡圈;孔用挡圈;轴用挡圈;纱嘴头,其他紧固件、接件密封垫圈卡圈.
12.
Lock rings with cone pin
GB/T883-1986锥销锁紧挡圈
13.
Lock ring with scre
GB/T884-1986螺钉锁紧挡圈
14.
Spring lock washer with adjustable inside and outside diameters.
内径和外径都可调整的弹簧锁垫圈。
15.
Tolerances for fasteners--Washers
GB/T3103.3-1982紧固件公差平垫圈
16.
Top view of spring lock washer or spacer with adjustable inside and outside diameters.
内径和外径都可调整的弹簧锁垫圈的俯视图。
17.
horse shoe washer
开口垫圈,马蹄形垫圈
18.
Each packing ring individually inserted and compressed for better tightness.
每个垫圈都分别穿入并经过压紧以提供更好的紧固性。