1.
A typical cryogenic liquid cylinder is depicted in Fig. 2.
典型的低温液体钢瓶如图2所示。
2.
The types of containers in use include the dewar, cryogenic liquid cylinder, and cryogenic storage tank.
使用中的容器类型包括杜瓦瓶、低温液体钢瓶和低温储存罐。
3.
Carbon dioxide is also stored and shipped as a liquid in cryogenic cylinders at reduced temperature and at a pressure of about 300 psig.
二氧化碳还可以作为液体在压力减小到大约300 psig的低温钢瓶内储存和运输，
4.
cryogenic storage vessel
深低温液化气体贮槽
5.
The cylinder pressure will remain constant at the vapor pressure of the material as long as there is any liquid remaining in the cylinder.
只要在钢瓶内还有液体，钢瓶的压力就会保持在材料的蒸气压。
6.
The amount of gas in a cylinder is determined by the pressure, temperature, cylinder size, and cylinder pressure rating. The molecular symbol for hydrogen is H2 .
钢瓶的气体容量由压力、温度、钢瓶尺寸和钢瓶的额定压力来决定。氢的分子式是H2.。
7.
The liquid is pushed from the cylinder by the vapor pressure of the product. As the liquid is removed, it increases the volume of the vapor space of the cylinder.
产品的蒸气压把液体推出钢瓶。在液体被提取后，它增加了钢瓶蒸气空间的体积。
8.
Hydrogen chloride is a liquefied compressed gas. The cylinder contains both liquid and gas.
氯化氢是一种液化压缩气体。钢瓶同时装有液体和气体。
9.
Liquefied petroleum gas cylinders
GB5842-1996液化石油气钢瓶
10.
Use tongs to immerse and remove objects from cryogenic liquids.
用夹具浸入低温液体中来移动物体。
11.
Study on the Welding Procedure of Steel in the Liquefied Petroleum Gas Low Temperature Storage Tanks;
液化石油气低温储罐用钢焊接工艺研究
12.
A Study on Welding Process of 9Ni Steel for LNG Cryogenic Tanks
液化天然气低温储罐用9Ni钢焊接工艺研究
13.
Research and Application of Ultralow Temperature 9Ni Steel for LNG Storage Tank
液化天然气储罐用超低温9Ni钢的研究及应用
14.
Effect of ESR on Cryogenic Toughness of Austenitic Steel
电渣重熔对奥氏体钢低温韧性的影响
15.
Strain Hardening of Cryogenic Vessels from Austenitic Stainless Steels;
应变强化奥氏体不锈钢低温容器研究
16.
Grain Boundary Martensite Formation and Tempering Brittleness at Low Temperature of Steels
钢的晶界马氏体形成与低温回火脆性
17.
Microstructure and Properties of New Type Bainitic Steels at Low Temperature Tempering
低温回火态新型贝氏体钢的组织性能
18.
Then, pneumatic valve spring made from this spring steel wire have been treated by this investigation of liquid tufftriding process.
然后 ,用以对此规格的钢丝制造的气阀弹簧进行了低温液体软氮化处理。