1.
FSU (Fill-in Signal Unit)Signal unit types
FSU（插入信令单元）信令单元类型
2.
MSU (Message Signal Unit)
MSU（消息信令单元）
3.
The value in this cell is invalid or missing. Click on 'Display Type Information' for specific details.
此单元格中的值无效或丢失。请单击“显示类型信息”以了解详细信息。
4.
MSUs are the only signal units that are retransmitted if they are received in error.
MSU 是信令接收出错时仅传输的信令单元。
5.
LSSU (Link Status Signaling Unit)Last bit of previous unit
LSSU（链接状态信令单元）前一个单元的最后一位
6.
Link Status Signal Units (LSSU) - transport link status information to an adjacent signaling point.
链路状态信令单元 (LSSU) -- 将链路状态信息传输到某个相邻的信令点。
7.
Signal unit initial alignment - invokes initial alignment prior to activating or restoring a signaling link.
信令单元初始定位 -- 在激活或恢复信令链路之前调用初始定位。
8.
Signal unit delimitation - inserts binary 襢lags? to delimit (separate) messages.
信令单元定界 -- 插入二进制的"标志"定界（分隔）消息。
9.
Bridge Protocol Data Unit: A message type used by bridges to exchange management and control information.
桥接协议数据单元：网桥使用这种信息类型进行管理和控制信息交换。
10.
Programming and Connection Requirements Based on Unit Type
基于单元类型的编程和连接要求
11.
Message Signal Units (MSU) - transport user information received from the SCCP, ISUP or the MTP 3 layers.
消息信令单元(MSU)--传输从SCCP、ISUP或MTP第3层收到的用户信息。
12.
Design of RF Power Amplifier for Beacon
某型指点信标机射频功放单元的设计
13.
Particle that this element gets its type information from.
此元素从中获取其类型信息的粒子。
14.
The configuration information for type {0} does not match its metadata.
类型 {0} 的配置信息与其元数据不匹配。
15.
TCAP messages are contained within the SCCP message signal units, and are made up of two sublayers which work together:
TCAP 消息包含在 SCCP 消息信令单元中，并由两个一同运行的子层组成：
16.
There are three different types of signal units differentiated by the value contained in the Link Indicator field.
有三种不同的信令单元链路，可根据指示器字段所含的值进行区分。
17.
Signal unit error detection and correction - discards detected erroneous message and requests a re-transmission.
信令单元错误检测和校正 -- 废弃检测到的出错消息并请求重新传输。
18.
These signal units are used to bring a link up or down and verify that it is working correctly.
这些信令单元用于建立或撤消某个链路并验证链路是否正常工作。