1.
Anchor/support bolt holes are located in base of body.
固定器/支架螺栓孔位于阀门的基座。
2.
LDP Pump Bracket Nuts/Bolts
LDP泵支架螺帽/螺栓
3.
LEFT ENGINE MOUNT BRACKET LOWER BOLTS
左引擎固定支架下螺栓
4.
Bolt, X-member/rear support
螺栓，X型构件/后支架
5.
Remove nuts, U-bolts and spring bracket from axle.
由车轴拆下螺帽，U型螺栓和弹簧支架。
6.
Tighten the engine mount-to-bracket bolts.
拧紧引擎架至支架的螺栓。
7.
Remove the upper suspension arm nut and bolt at the axle bracket.
从车轴支架上拆去上端悬吊臂螺帽和螺栓。
8.
Remove the lower suspension arm nut and bolt from the axle bracket.
从车轴支架上拆去下端悬吊臂螺帽和螺栓。
9.
Use a universal puller to separate the ball stud from the frame rail bracket.
用万能拉出器将圆头螺栓从车架横梁支架上拆下。
10.
Loosen but do not fully remove the four bolts that attach the stabilizer bar bushing retainers to the rear axle brackets.
松开但不完全拆卸接合稳定杆衬套扣环与后车轴支架的4支螺栓。
11.
hinge (guide) bracket bolt
绞链(导向)托架螺栓
12.
Move glass carriage to vent position and remove rearward adjustment bolt from adjustment bracket.
将玻璃搬运车移至通风口位置，并从调节支架上拆卸后调节螺栓。
13.
Front Retractor Anchor Bolt
前皮带卷收器支撑螺栓
14.
BRACKET MOUNTING NUTS
支架固定螺帽（2）
15.
High strength bolts for joints of space grid structures
GB/T16939-1997钢网架螺栓球节点用高强度螺栓
16.
Drug-eluting Stents in Coronary Artery and Stent Thrombosis
冠状动脉药物洗脱支架与支架内血栓
17.
Bushing Retainer To Suspension Cradle Attaching Bolts
衬套扣环与悬吊架接合螺栓
18.
The cross girder center segments of the bents were field bolted.
构架横梁的中间段在工地用螺栓连接。