1.
scratch(ing) brush
钢丝刷, 金属丝刷子
2.
spark-resistant wire wheel brush
火花电阻圆盘钢丝刷
3.
Clean posts and clamp with wire brush.
用钢丝刷清刷接线柱和夹子。
4.
Wire brushes may be used, but avoid removing an excessive amount of metal.
可以采用钢丝刷，但是避免对金属过分清除。
5.
Use sand cloth or steel wire brush to clean both tube and cut to bright metal. Steel wool is not recommended.
使用纱布或钢丝刷清除管道和切割部位,使其金属表面发光发亮。建议不要使用钢丝绒。
6.
2. Use sand cloth or steel wire Brush to clean Both tube and cut to Bright metal. Steel wool is not recommended.
2. 使用纱布或钢丝刷清除管道和切割部位,使其金属表面发光发亮。建议不要使用钢丝绒。
7.
Use sand cloth or steel wire brush to clean both tube and cup to a bright metal. Steel wool is not recommended.
采用砂布或钢丝刷清除管道和端口，使其显露出光洁的金属色。不建议采用钢丝棉。
8.
Fine sand cloth or emery cloth may be used with the same precautions.
细砂布或金刚砂布可以采用，但和采用钢丝刷一样也要避免对金属过分清除。
9.
Before friction machine parts inspection, the friction coefficient whether the specimen design requirements, floating steel brush to remove rust, oil, paint cleanse.
配件前检查摩擦机，试件的摩擦系数是否达到设计要求，浮锈用钢丝刷除掉，油污、漆清除干净。
10.
wire drawing,drawbench and steel wire
拉丝、拉丝机、钢丝
11.
"card:a wire-toothed brush or a machine fitted with rows of wire teeth, used to disentangle fibers, as of wool, prior to spinning."
梳理机:一种钢丝齿的刷子或装有数排钢丝齿的机器,在纺纱前用于理清纤维,如羊毛纤维。
12.
A wire-toothed brush or a machine fitted with rows of wire teeth, used to disentangle fibers, as of wool, prior to spinning.
梳理机一种钢丝齿的刷子或装有数排钢丝齿的机器，在纺纱前用于理清纤维，如羊毛纤维
13.
brushing defect
刷柳（丝绒整理疵）
14.
card raising machine
钢丝起绒机,钢丝起毛机,钢丝拉绒机
15.
pepe stock and dies
管子丝攻和螺丝钢板
16.
barbed wire; wire with short sharp points along it,used for fences, etc
刺钢丝（用作铁丝网等）
17.
Round wire circlips
GB/T921-1986钢丝锁圈
18.
Barbed steel wires
GB/T348-1964刺钢丝