1.
Make all field connections to the remote alarm functions and any other optional features. Do not connect AC power.
进行所有远程警报功能和任何其它选择功能的现场连接。不要连接交流电源。
2.
flange-mounted alternator
法兰连接交流发电机
3.
The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off.
即使本机的电源已经关闭，但只要它还连接在墙上的电源插座上，就未脱离交流电源（主电源）。
4.
Inserting the AC supply lead into the unit automatically disconnects the batteries.
交流电源导线连接本机时，机内干电池即自动切断。
5.
As a result, the AC supply lead must be removed from the unit in order to operate the unit on battery power.
因此，如使用机内干电池，须将连接本机之交流电源导线拔去。
6.
"Pull all wires necessary for field connections, remote alarm functions, AC power and all other optional features."
拉出所有用于现场连接、远程警报功能、交流电源和所有其它选择功能所必需连接的电缆。
7.
Check your batteries or your AC connection.\0
请检查您的电池或交流电的连接。\0
8.
circuit design, wiring diagrams, schematics, AC/DC sources
电路设计, 接线图, 示意图, 交流/直流电源
9.
The product are applicable to A.C rat -ed boltage up to 250V connecting for various electrical equipment and instrument,eletricity lighting.
该产品适用于交流额定电压伏以下的电器、仪器仪表、照明器具等与电源连接用。
10.
large oversized 4 kw ac motor drive, coupled directly to a helical bevel gear, which in turn is connected to an individual housing containing the oversized trust bearing for the screw drive.
大型4千瓦交流电机直接同螺旋型锥齿轮连接。
11.
Plug the flow regulator into the wall and attach the nebulizer.
将气流调节器插头接通墙上电源，并连接喷雾器。
12.
The Research on Square-wave Alternating Current in TIG Welding with MCU
微机控制方波交流TIG焊接电源研究
13.
a cord to conduct power to an electrical appliance.
连接电源和用电器的线。
14.
Forbid link alternating current to the output side.
严禁将交流输入电源接至节电器输出端上。
15.
The only access points for transients are the AC power line wires and any data and telecommunication wiring.
电涌唯一的接入点就是交流电源线和任何的数据及电信接线。
16.
Terminal pair 1-2 must be continuously energized from an A.C. supply line of electrical characteristics shown on the data plate.
接线端子1和2必须按照参数盘上显示的电特性接通交流电源。
17.
AC current or voltage source. DC offset can be specified.
交流电流源或电压源。可指定直流偏移。
18.
Connect the Power Supply Cables
连接电源供应器的电源线