1.
Split duct (Split fountain): Dividing the ink duct on the press so that the left side prints one colour and the right side prints a differnt colour;
分节墨槽:把墨槽分开,使左边部分印一个色,右边部分印另一个色；
2.
Duct roller: A large diameter roller which are the main part of the ink duct.It supplies ink and meters ink quantity by the amount of rotation.
墨槽轴:组成墨槽的一支大直径的轴。用来供应油墨，并以它的转动角度来作输墨的调节。
3.
Analysis and contrastive study on buffer effect of variable throttling grooves
变节流槽缓冲效果的分析与对比研究
4.
Duct: Ink reservoir in a letterpress or offset printing machine made-up of a duct roller and duct blade,designed to meter out a film of ink.
墨槽:活版或柯式印刷机上的贮墨装置。由墨槽轴和墨槽刀片组成。这个设计，可计量的放出墨膜。
5.
Analysis of Flow Field Characteristic of Orifice and Study on Damping Grooves in Hydraulic Pump Valve Plate
节流孔流场特性分析及液压泵减振槽研究
6.
The first section begins with analyzing Mohist’s source and continues to research about the source of its legal thought of equality.
第一节从分析墨学渊源开始,转入对墨家平等法律观渊源的考证。
7.
Ink duct: Part of printing machine which stores and supplies ink to the inking rollers. Also called Ink fountain. Rom Duct.
墨槽:印刷机上贮存油墨和供应墨辊所需墨量的部份。
8.
Ductor roller: On an printing press,the roller which alternately contacts the duct roller and distributing roller.Length of contact or "dwell" of ductor can be adjusted.ALso called Feed roller.
输送轴:印刷机上，分别接触墨槽和分布轴的一支轴。接触时间或停顿时间是可以调校的。
9.
Duct blade: A flexible steel blade which can be adjusted inrelation to the duct roller to regulate the thickness of the ink film which it carries during rotation.
墨槽刀片:软性钢刀片，可配合墨槽轴的转动作调校，控制带出的墨膜厚度。
10.
POWER SEAT WIRE HARNESS SLOT
动力调节座椅线束槽
11.
pronounce with a flap, of alveolar sounds.
发齿槽音时用节拍发出。
12.
Influence of Graduation Error of Dividing Disk on Error of Hob Chip Pocket Accumulated Pitch
滚刀开刃磨床分度盘误差对滚刀容屑槽周节累积误差的影响
13.
Identification of Periodicity & Stripe Sort Array and Dynamics Analysis of Forward Slot& Backward Slot;
低噪轮胎花纹周期和节距辨识及其顺逆槽噪声动力学分析
14.
From the informations collected,the computer-assisted inking system can set the ink duct accordingly.
根据记录资料，电脑辅助控制墨量系统就相应的调校墨槽。
15.
Ductile Iron-Automotive Steering Knuckle's Casting Technology and Computer Analysis and Stimulation
球墨铸铁—汽车转向节的铸造工艺及计算机模拟仿真分析
16.
Relation of Morphometric Attributes on Body Weight for Wild Fenneropenaeus merguiensis and Penaeus monodon from Beibu Bay
北部湾墨吉明对虾和斑节对虾形态性状对体质量的影响分析
17.
Ink tank is made of steel stainless, durable and easy to clean.
油墨水槽采用不锈钢材永不锈蚀，容易移动清洗。
18.
One, the Texas Gulf Coast, is in the Gulf Coast geosyncline.
得克萨斯海湾有一海岸在墨西哥湾海岸地槽中。