1.
unloading auger clutch lever
卸粮螺旋离合器接合杆
2.
Reform of Screw-lifting Dumping Cart
螺旋升降式卸料小车改造试验——散粮卸车新途径
3.
THE ENVELOPE CURVE EQUATION OF SWEEP AUGER FOR DISCHARGE GRAIN DIVIDED IN LAYER FROM A CYLINDER BIN
分层卸粮扫仓螺旋输送器轮廓曲线方程
4.
unloader's cutting auger
卸载机切碎螺旋推运器
5.
Strength and Vibration Analysis of Screw Conveyor of Decanter Centrifuge;
卧式螺旋卸料沉降离心机的螺旋强度和振动分析
6.
Remove the battery holder by turning the battery holder screw counterclockwise with a coin.
用硬币逆时针旋开电池室上的螺丝,卸下电池室。
7.
The Theory Research and Simulation Analysis on Scroll Discharge Screen Centrifuge;
螺旋卸料过滤离心机的理论研究与仿真分析
8.
Desingn of Three-phase Decanter Centrifuge;
三相卧式螺旋卸料沉降离心机的设计研究
9.
Remove the throat plate, loosen hook screw 6 and adjust the hook.
调整旋梭时，请卸下针板，拧松旋梭固定螺丝6，然后进行调整。
10.
It can be removed by simply unscrewing with a large pipe wrench.
只需用一把较大的管道扳钳旋下螺纹就可以拆卸底部塞弹簧总成。
11.
Lower the lifting device enough to remove the axlThe coil springs will drop with the axle.
降低支撑设备以拆卸车轴。螺旋弹簧随车轴同时拆下。
12.
Augers and unloaders will not work with low dry-matter silage.
输送螺旋和卸料机无法处理低于物质的青贮饲料。
13.
Remove compression from spring by turning adjusting screw (1) counterclockwise.
通过反时针方向旋转调节螺丝(1)从弹簧上拆卸压缩件。
14.
Design and Realization of the Control System of Horizontal Screw-conveyor Centrifuge;
卧式螺旋卸料离心脱水机控制系统的设计与实现
15.
Research on Rapid Design System of Centrifuge;
卧式螺旋卸料离心脱水机快速设计系统的研究开发
16.
The Helix-motion Unload Machine of No.3 Sintering Shop Electric Control System Perfection and Technology Transform’s Summary
三烧结车间螺旋卸车机电控系统完善和改造技术分析
17.
Remove the battery cover retaining screws from the data back battery cover with a small (+) or (-) screwdriver. Remove the battery cover.
用小型（+）或（-）自螺丝起子,从日期背盖电池盖上旋下电池盒盖上的螺丝,卸下电池盒盖
18.
Remove stem nuts (22). Keep stem from turning by inserting screw driver in slot on end of stem.
拆卸阀杆螺母(22)。通过在阀杆末端的槽内插入螺丝刀来避免阀杆旋转。