1.
Kits include: Disc& Spring assembly, Cover O-ring and lubricant.
组件包括：阀瓣和弹簧总成，阀盖O形环和润滑剂。
2.
During normal field service there is no need to remove the bottom plug spring assembly other than inspection.
在正常的现场维修时，除非检查，否则不需要拆卸底部塞弹簧总成。
3.
It can be removed by simply unscrewing with a large pipe wrench.
只需用一把较大的管道扳钳旋下螺纹就可以拆卸底部塞弹簧总成。
4.
Remove the relief valve cover, stem/diaphragm assembly, and relief valve spring.
拆卸安全阀阀盖，阀杆/隔膜总成，和安全阀弹簧。
5.
Replace length cut springs to std. springs. Close blind holes.
将定尺弹簧改成标准弹簧.关闭盲孔.
6.
The seat, spring cage, spring and disc assembly are now individual components.
此时，阀座，止回笼，弹簧和阀瓣总成就分解成都里的部件。
7.
bellows forming mandrels and dies
弹簧箱成形心轴和模具
8.
"Clutch pressure springs. If the pressure springs have overheated, the paint will Burn off or the springs will turn Blue."
离合器压紧弹簧:如果压紧弹簧过热,漆料将被烧掉或弹簧变成蓝色。
9.
A tank containing water is placed on a spring scale, which registers a total weight W.
在弹簧秤上放一桶水，称得总重量为W．
10.
The coil springs is made of a length of special spring steel which is wound in the shape of a coil.
螺旋弹簧是由一长条形的特种弹簧钢制成,绕成螺旋状。
11.
The assembly shall consist of two threaded-in check modules with captured springs and silicone seat discs.
这种总成应该由两个螺纹旋进、配置复位弹簧和硅酮阀座阀瓣的止回阀模块构成。
12.
CNC coiling machine, it may be produce the precision extension spring.
万能电脑、弹簧成型机，也可生产相当精密的拉力弹簧。
13.
The thermostatic spring is made up of two different metal strips welded together and formed into a spiral.
恒温控制弹簧是以两种金属条缠在一起形成螺旋状的弹簧。
14.
To avoid this discharge, install a spring-loaded, rubber seated check valve ahead of the backflow assembly.
为了避免这种排放，要在防回流阀总成前面安装一个弹簧驱动、橡胶阀座的止回阀。
15.
The check valves shall utilize a single torsion spring design to minimize pressure drop through the assembly.
这种止回阀应该采用单扭力弹簧结构来将通过总成的压降减到最小程度。
16.
The wire spring was evenly coiled.
这根金属丝弹簧是均匀盘绕成的。
17.
The Study on Extrusion Forming Technology of Magnesium Alloy AZ31 Spring Plank;
AZ31镁合金弹簧支架挤压成形工艺研究
18.
Research on Air Spring Vibration Isolation Foundation Control Technology Based on CAN Bus;
基于CAN总线空气弹簧隔振基础控制技术研究