1.
LOWER TRACK BAR BOLT INSTALLATION
下横拉杆螺栓的安装
2.
Remove the nut and bolt attaching the track bar to the track bar mount on the body of the vehiclRemove the track bar from the track bar mount.
拆卸接合横拉杆与位于车身之横拉杆固定座的螺帽与螺栓。将横拉杆自横拉杆固定座拆卸下来。
3.
Position lever assembly on floorpan and install lever mounting bolts.
将拉杆组合放置到底板上并安装拉杆固定螺栓。
4.
Install connecting rod bolt protectors on rod bolts.
在连杆螺栓上安装连杆螺栓保护件。
5.
Install bolts holding front of suspension crossmember to frame rails under upper control arm.
安装将悬吊横梁前部紧固到上控制臂下面的框架轨道的螺栓。
6.
tightening bolt
拉紧螺栓，(铁)风口拉杆
7.
Position plate bracket and install attaching bolts through vehicle rear crossmember.
定位板托架并穿过车辆后横梁安装附接螺栓。
8.
The method is also proposed on making thread-hole and bolt in interving concerted process, bolt connection as well.
干涉配合螺接过程中螺孔和螺栓的加工方法以及螺栓的安装方法。
9.
Design of Tensile Testing Device for Small Diameter Bolt and Screw
小直径螺栓和螺钉拉伸试验装置的设计
10.
Install the bolts attaching the end cap to the front fender.
安装连接末端端盖到前挡泥板的螺栓。
11.
Construction Supervision over Erection of High-Strength Friction Grip Bolts in Lightgauge Steel Structure
轻钢结构高强度螺栓安装的施工监理
12.
Lower Ball Stud Remove/Install
上圆顶螺栓拆卸/安装
13.
Application of The bolt stretcher in tightening and disassembling polymer filter
螺栓预拉伸法在聚酯熔体过滤器螺栓装拆作业中的应用
14.
The track bar connects the rear axle to the frame/body of the vehiclThe track bar is isolated from the body of the vehicle by an isloator bushing located in each end of the track bar.
横拉杆把后轴联结到车框或车体上。横拉杆用一安放在横拉杆两端的隔离衬套与车体隔离开。
15.
Install adjusting nut to the tensioner rod and adjust parking brakes.
将调整螺帽安装到拉伸器杆并调整手刹车。
16.
Tie Rod End To Steering Knuckle Nut
转向拉杆端与转向关节螺栓
17.
Tie Rod End Adjusting Sleeve Nut
转向拉杆端调整轴筒螺栓
18.
Force Analysis of Chord Bolts of Type-321 Assembled Steel Bridge
“321”装配式公路钢桥弦杆螺栓受力分析