1.
Remove piston and connecting rods from crankshaft journals.
从曲轴颈上拆下活塞和连杆。
2.
A beam that connects the piston rod to the connecting rod of a reciprocating engine.
十字头连接活塞杆和往复式发动机连杆的横杆
3.
pin joining a piston to a connecting rod.
连结活塞和机器连杆的销。
4.
The piston-rods connect the pistons to the parts of the engine which they move.
活塞杆把活塞和引擎中被活塞驱动的部件连在一起。
5.
The connecting rod is attached to the piston by the piston pin.
连杆与活塞的连接是采用活塞销。
6.
piston connecting rod arrangement misalignment
活塞-连杆布置失中
7.
reaming and pushing machine for piston connecting rod bush
活塞连杆衬套铰压机
8.
rod that moves or is moved by a piston.
驱动活塞或被活塞驱动的连杆。
9.
As the piston descended, a ratchet engaged the piston rod and engine shaft and thus power was transmitted.
当活塞下行时，棘轮连接活塞杆和发动机轴，因此将功率输送出去。
10.
The piston end of the rod is attached to the piston by the piston pin, or wrist pin.
连杆的活塞端用活塞销或销轴安装在活塞上。
11.
"After the piston-and-connecting-rod assemblies have been removed from the engine and the pistons and rods separated, the rings should be removed from the piston.."
先将活塞及连杆组件从发动机上拆下再把活塞与连杆分开之后,即可将活塞环从活塞上取下。
12.
When discharging, the motor operates, hydraulic cylinder charges pressure, push rod (piston rod) draw back, the valve plate connected with push rod opens, the materials are discharged.
当需要卸料时，电机运转，液压缸增压，推杆（活塞杆）收回，和推杆连接的阀板开启，物料卸下。
13.
Connecting rods and pistons are removed as assembly from the engine.
把连杆和活塞做为整体组件从发动机上拆卸下来。
14.
Kinematics and Dynamics Simulation on Model of G6400ZC Diesel Engine
基于ADAMS的G6400ZC型柴油机的曲轴-连杆-活塞运动学和动力学仿真
15.
Strength Analysis of Master Connecting Rod for Stern Motor Radial Engine
某型星形活塞发动机主连杆强度分析
16.
Research of Measure System of the Piston and Connecting Rod Base on the LAN;
基于LAN的柴油机活塞—连杆组检测系统
17.
An Analysis of the Improvement of Piston-Con Rod-Crank-Shaft of CG125 Engine
CG125发动机活塞连杆曲轴改进分析
18.
RE-nitrocarburizing Technology for Piston Rod Made of 40CrMnMo
40CrMnMo活塞连杆稀土离子氮碳共渗工艺