1.
Check and adjust stop lamp switch if necessary.
如果必要，检查并且调节煞车灯开关
2.
REPLACE THE PARK BRAKE SWITCH.
合上手动煞车开关。＊
3.
BRAKE FLUID LEVEL SWITCH
煞车油液位高度开关
4.
RELEASE THE PARK BRAKE, DISCONNECT THE BRAKE FLUID LEVEL SWITCH CONNECTOR.
放开手煞车，断开煞车油液位高开关接头。
5.
KEY OFF, DISCONNECT THE LOW BRAKE FLUID LEVEL SWITCH CONNECTOR.
关闭开关，断开低煞车液位开关接头。＊＊
6.
Brake Lamp Switch Output (to Lamps)
刹车灯开关输出（对灯）
7.
Be sure the handbrake is on before you leave the car
你离开车子前，务必把手煞车煞
8.
Drain Plug/Backup Light Switch Location
放油塞/倒车灯开关位置
9.
Install parking brake lamp switch.
安装手刹车灯开关。
10.
DOES THE DRB SHOW "BRAKE WARNING LAMP" ON?
是否ＤＲＢ显示“煞车警告灯”为ＯＮ？
11.
REPAIR THE RED BRAKE WARNING LAMP CIRCUIT FOR A SHORT TO GROUN
修理红色煞车警报灯电路对地短路。＊
12.
WITH THE DRB, READ THE BRAKE WARNING LAMP STATUS.
用ＤＲＢ，观察煞车警告灯状态。
13.
CONNECT A JUMPER WIRE BETWEEN THE RED BRAKE WARNING LAMP CIRCUIT AND GROUN
在红色煞车警报灯电路与地之间连接跳线。
14.
Driver door jamb switch refer to Group 8L Lamps
驾驶员车门框开关-请参阅单元8L -灯
15.
BK/YL Park Lamp Switch Output
ＢＫ／ＹＬ 停车指示灯开关输出
16.
CHECKING BRAKE LAMP SWITCH INPUT TO CAB
检查至ＣＡＢ的刹车灯开关输入
17.
"When the light switch is pulled out, the circuit from the Battery to the headlights is completed. This circuit is through the foot selector switch."
车灯开关开启时,蓄电池和前灯之间的电路接通。前灯的电路由脚踏选择开关来接通,
18.
REPAIR THE BRAKE LAMP SWITCH OUTPUT CIRCUIT FOR A SHORT TO B .
修理刹车灯开关输出b>电路b>对Ｂ短路。＊