1.
Optimization Design of Engine Exhaust Manifold Based on Finite Element Analysis
基于有限元分析的发动机排气歧管优化设计
2.
CFD & FEA coupling analysis application in exhaust manifold analysis
某发动机排气歧管流固耦合分析的应用
3.
The Research on the Performance of Timed Manifold Injection Hydrogen-Fueled Engine;
进气歧管喷射式氢气发动机性能研究
4.
Disconnect the exhaust pipe at the exhaust manifol
断开排气歧管的排气管。
5.
manifold (intake and exhaust) for internal combustion, aircraft engines
歧管（进气和排气）,航空内燃机用
6.
Design Of Intake Manifold For 1.1L Engine
1.1L前驱动微型汽车发动机进气歧管开发
7.
Design of Intake of Engine Equipped with Carburetor for EFI Technology of Engine
化油器发动机进气歧管电喷化的设计开发
8.
ramjet exhaust nozzle
冲压式喷气发动机排气喷管
9.
The gases pass into the exhaust manifold.
这些废气进入排气歧管。
10.
Disconnect exhaust pipe at manifol
在歧管处断开排气管。
11.
exhaust manifold heat control valve
排气歧管热量控制阀
12.
Remove exhaust manifold heat shiel
拆下排气歧管隔热罩。
13.
Disconnect the exhaust pipe at the engine exhaust manifol
拆开引擎排气歧管处的排气管。
14.
Connect the exhaust pipe to the hanger and to the engine exhaust manifol
连接排气管到悬挂物、到引擎排气歧管。
15.
If the engine backfires, the sudden pressure in the intake manifold forces the valve back.
如果发动机回火，进气歧管骤增的压力就迫使阀门向后移动。
16.
Vibration Test Failure Analysis on Engine Plastic Intake Manifold and Improvement Study
发动机塑料进气歧管振动试验失效分析与改进研究
17.
Couple CFD-FE-Analysis for a Gasoline Engine Exhaust Manifold of Thermal Load
CFD-FE耦合计算分析某汽油机排气歧管热负荷
18.
Install the intake manifold (refer to Group 11, Exhaust System and Intake Manifold).
安装进气歧管（见单元11-排气系统和进气歧管）。