1.
Align the bushing with the spring eye or shackle eye and tighten the nut at the socket wrench end of the threaded roTighten until the bushing is forced into the spring eye.
将衬套对准弹簧眼或U型钩眼，并在螺纹杆的套筒板手末端锁紧螺帽。锁紧直到衬套进入簧眼。
2.
free lever hexagonal fixed socket wrench
活柄六角固定套筒扳手
3.
I need a socket set.
我需要一组扳手的套筒。
4.
bent-handle fixed socket
弯柄六角固定套筒扳手
5.
Remove the glove box inner door panel from the glove box outer door panel.
从手套箱外门板上拆下手套箱内门板。
6.
a warm tubular covering for the hands.
套在手上暖手的一种筒儿。
7.
Sleeve 1;Sleeve 2;Screwed sleeve 1;Screwed sleeve 2
套筒 1;套筒 2;螺纹套筒 1;螺纹套筒 2
8.
Sleeve 1;Sleeve 2;Sleeve 3;Screwed sleeve 1;Screwed sleeve 2
套筒 1;套筒 2;套筒 3;旋拧套筒 1;旋拧套筒 2
9.
Install the handle into the sleeve and note that whether or not the fixing ring has been in the slot of the sleeve.
将把手装入在套筒组上并且注意固定环是否有放入套筒的沟槽里。
10.
Three-dimensional Finite Element Analysis of Fixed, Removable Partial Denture and Telescopic Crown as Periodontal Splints;
固定、可摘及套筒冠牙周夹板的三维有限元研究
11.
We can reverse this pattern using specially generated adapter molecules made of antibodies that snap onto the arms of the virus like sockets on a socket wrench.
我们可以将抗体制成转接分子，接在病毒的手臂上，就像套筒扳手的套筒一样，来扭转这种情况。
12.
Use socket wrench to remove regulator seat for replacement.
采用套筒扳手来拆卸调节阀阀座进行更换。
13.
Remove the handwheel/ indicator sleeve assembly as per Steps5.1 and5.2.
按照5.1和5.2步骤拆卸手轮/示器套筒总成。
14.
Use of Sleeve Balun in Simulation and Measurement of Mobile Phone Antennas
套筒式巴伦在手机天线仿真和测量中的应用
15.
a wrench shaped like a brace (has a crank-shaped handle) and a socket head.
形似曲柄头（有一个鹤头把手）和套筒扳手头的扳手。
16.
Construction Technology of Integrated and Electrically Lifted Scaffold and Formwork System for Core-Tube Structure
核心筒整体电动升降脚手及模板体系施工技术
17.
Analysis and experiment of the optimum shrink range between chain plate and bush for agricultural machinery chain by using finite element method
农机链链板与套筒最优过盈量有限元分析及试验研究
18.
Analysis of the Sleeve Cylinder Used in Immersing Evaporation Cooling Motors Based on Mechanics of Thin Plates and Shells and Concerning Experiments;
基于板壳力学的蒸发冷却电机用薄壁套筒分析及相关实验研究