1.
Remove bulb socket from lamp.
从灯上拆除灯泡插座。
2.
TURN SIGNAL BULB SOCKET
转向信号灯灯泡插座
3.
Rotate turn signal bulb socket counterclockwise, pull on bulb to remove.
逆时钟旋转转向信号灯灯泡插座，拔下灯泡。
4.
Turn bulb socket 1/4 turn clockwise.
顺时钟旋转灯泡插座1/4圈。
5.
Rotate sidemarker bulb socket counterclockwise grasp and pull from lamp.
逆时钟旋转侧面车种识别信号灯灯泡插座，抓紧插座并从灯中将其拔出。
6.
Faber took in the empty light socket with the chair beneath it. He frowned in amazemnt.
费伯蹬上椅子看了看那空着的灯泡插座，惊异地蹙起眉头。
7.
IS THE KEY-IN LAMP BULB OPEN OR SOCKET DAMAGED?
钥匙灯泡或插座坏了吗？
8.
Remove bulb from socket.
从插座将灯泡拆下。
9.
Install bulbs and sockets in the lamp housing.
安装灯泡和插座于灯外壳上。
10.
Position bulb in socket and push into place.
将灯泡定位于插座并推入适当位置。
11.
A half-silvered bulb in a porcelain socket in the foyer.
门厅内一个瓷制插座上的部分镀银灯泡。
12.
I screwed the bulb into the socket.
我把灯泡拧进灯座。
13.
Position the bulb socket in the lamp and rotate clockwise.
将灯泡灯座置于灯中，并顺时针转动。
14.
Remove sidemarker socket from lamp.
从灯上拆卸侧面识别信号灯插座
15.
Position socket in lamp and rotate 1/4 turn.
固定插座于灯并将其旋转90度。
16.
Switch on the light at the wall-socket.
把电灯接通在墙上的电源插座上.
17.
I had to lower the light switches and raise the power points.
我得把电灯开关调低，把电源插座调高。
18.
flash light bulb
闪光灯灯泡手电筒灯泡