1.
The camshaft position sensor is located in the distributor on all engines.
在所有的引擎中，凸轮轴位置感知器位于分电盘内部。
2.
Supplies the required 5 volt power source to the crankshaft position sensor, camshaft position sensor, MAP sensor and throttle position sensor.
向曲轴位置感应器、凸轮轴位置感应器、MAP感应器以及节气阀位置感应器提供所需的5伏电压。
3.
Crank Position Sensor Sig
曲轴位置感知器信号
4.
cam shaft driving gear
凸轮轴传动齿轮凸轮轴传动装置
5.
As the camshaft rotates, the lobe, or high spot of the cam, pushes against parts connected to the stem of the valve.
当凸轮轴旋转时，凸轮凸起的或者高点的位置，推动气门座。
6.
Vehicle Speed Sensor Location—4WD
车辆速度感知器位置— 4轮驱动
7.
Vehicle Speed Sensor Location—2 Wheel Drive
车辆速度感知器位置—2轮驱动
8.
cam shaft displacement control for reversing engines
可倒转发动机的凸轮轴位移控制器
9.
cam shaft drive
凸轮轴传动凸轮轴传动装置
10.
Improvement and application of hardening inductor for brake camshaft′s neck
制动凸轮轴轴颈淬火感应器改进与应用
11.
overhead camshaft engine
上置式凸轮轴发动机
12.
cam shaft reversing lock
凸轮轴换向闭锁装置
13.
CRANKSHAFT POSITION SENSOR—V-8 ENGINES
曲轴位置感知器—2公升/9公升 V-8 引擎
14.
Two TDC (Top Dead Center) sensors are mounted at the rear of the single camshaft.
两个上死点的传感器安装在凸轮轴的后面。
15.
In addition, when the camshaft is located over the cylinder head, the arrangement is known as an overhead camshaft( OHC) design.
另外，当凸轮轴位于汽缸盖上面时，这种方式被称为是顶置凸轮轴(HC)构。
16.
An engine shaft fitted with a cam or cams.
凸轮轴与一个或多个凸轮相配的机器轴
17.
A Crankshaft Fluctuation Sensor (CKF) is located near the bottom of the timing cover where it generates a signal as the crankshaft timing chain sprocket rotates past it.
曲轴位置传感器安装在定时器壳底部附近，产生一个曲轴定时链轮齿通过的信号。
18.
overhead cam shaft
上凸轮轴上部凸轮轴