1.
Solution to surface reconstruction from cross-sectional contours based on PDE
基于偏微分方程的断层间表面的重构
2.
Analysis of Thermal Properties at Surface of Multilayer Insulation of Space Target
空间多层隔热组件表面红外辐射分析
3.
Gouge or infilling is the material between two faces of a structural discontinuity such as a fault.
断层泥或充填物是指一个不连续面（如断层）的两个表面之间的物质。
4.
An extra lining between the outer fabric and regular lining of a garment.
内衬衣物表面与正常衬料间的一层附加衬料
5.
It is well known that bed porosities are greater near the bounding surface.
众所周知，靠近边界表面的床层自由空间率较大。
6.
The Preparation of Graded Coating of Ni-Al Intermetallic Compound on the Surface of Copper;
Cu表面Ni-Al金属间化合物梯度涂层的制备
7.
Virtual Inversion of Vibration Source on Surface of Single Soil Layer Overlaid on Elastic Half-Space;
弹性半空间单一覆盖层表面振源的虚拟反演
8.
The Double-Skin Research for Space Construction and Visual Interface
建筑双层表皮的空间结构及视觉界面研究
9.
Laser Cladding Fe-Al Intermetallics Coatings on ZL101 Substrate
ZL101铝合金表面激光熔覆Fe-Al金属间化合物涂层
10.
Scattering of Elastic Waves Caused by an Interface Crack in a Layered Half Space. Far Field Surface Displacement in the Layer
加层半空间交界裂纹的弹性波散射—弹性层表面位移的远场研究
11.
An atmospheric area about80 kilometers(50 miles) above the earth's surface, forming the upper boundary of the mesosphere.
中间层离地球表面约80公里（即50英里）的空气地带，形成中间层的上边界
12.
A stony or metallic mass of matter that has fallen to the earth's surface from outer space.
陨星从外层空间坠落到地球表面的大块石头或金属物质
13.
For intermediate coat on the surface of zinc silicate or metal coating to reduce popping.
作为中间涂层涂于涂有硅酸锌或金属涂料的表面以减少起泡现象。
14.
EFFECT OF PROCESSING TEMPERATURE AND TIME ON MICROSTRUCTURE OF Al-Zn ALLOYED LAYER PREPARED BY CO-ALUMINIZING-ZICIZING ON MAGNESIUM ALLOY
扩渗温度和时间对镁合金表面Al-Zn共渗层显微组织的影响
15.
Study on Plasma Niobium Surface Alloying of 0Cr18Ni9 Steel and Intergranular Corrosion Resistance Property of Alloyed Layer
0Cr18Ni9钢表面等离子铌合金化及改性层抗晶间腐蚀性能的研究
16.
The sorption of aromatic amines onto the interlayer siloxane surface of organobentonites
有机膨润土层间硅氧烷表面对亲水性芳香胺的吸附
17.
Astral Plane Surface Skin: The surface skin of an astral plane.
星体层表皮：一个星体层的表面皮肤。
18.
ENJECT ETHANOL OR ACETONE ABOUT25 mm TO THE DEW-POINT METER CONTAINER, THEN PUT IN DRY ICE TO REFRIGERATE AND KEEP THE CENTIGRADE UP TO OR LOWER THAN-40℃.
将试样水平放置，在上面涂一层乙醇或丙酮。使露点仪与该表面紧密接触，停留时间按表4的规定。