1.
dyes for copper-salt after-treatment
用铜盐后处理的染料
2.
direct dyes for metal salt after -treatment
用金属盐后处理的直接染料
3.
Study on Treatment of Pyrophosphate Copper Plating Wastewater by Synthesizing LDH in Situ;
即时合成层状双氢氧化物处理焦磷酸盐镀铜废水的研究
4.
Study on Treatment of Electroplating Waste-water with Immobilized SRB
硫酸盐还原菌(SRB)固定化技术处理镀铜、镀铁混合电镀废水的研究
5.
Design of the Control System Based on PLC and Touch Screen for the Post-processor of Copper Foil
基于PLC和触摸屏的铜箔后处理机控制系统设计
6.
Determination of Soluble Copper,Chromium and Arsenic in Preservative Treated Wood by ICP-AES
ICP-AES法测定防腐处理后木材中可溶性铜铬砷
7.
The Drive System of the Copper Sheet Post-processing Production line Based on PROFIBUS
基于PROFIBUS总线的铜箔后处理生产线传动系统
8.
Study on the Resistance to Decay Fungi of Chinese Fir Treated by ACQ-D and Heat Treatment;
季胺铜防腐剂处理和热处理后人工林杉木的耐腐性研究
9.
Effects of steaming post-treatments on leaching resistance of copper in ACQ-D treated Chinese fir.
蒸汽后处理对ACQ-D处理杉木中铜的抗水流失性的影响
10.
blu(e)ing salts
【冶】发蓝(处理用)盐
11.
Nitrogen detection of nitrate and its significance in the effluent after sewage treatment
污水处理后出水中硝酸盐氮的检测及其意义
12.
Molybdate Pro-teatment for Rear Earth Conversion film on LF21 Aluminum Alloy to Improve Corrosion Resistance
LF21铝合金稀土转化膜的开裂及其钼酸盐后处理
13.
Thermal Stability of Heavy Metals in MSWI Fly Ash Using Phosphate Via Water Washing Pretreatment
水洗磷酸盐预处理后飞灰中重金属的热稳定性
14.
Study on Multi-element Penetration and Heat-treatment of Copper and Brass;
纯铜、黄铜多元共渗及热处理工艺研究
15.
The microstructure of Cr-Mn-Cu alloy white cast iron changed after different heat treatment.
铬锰铜合金白口铸铁在经过不同的热处理之后，组织发生了变化。
16.
Solid-state Phase Transformation in CuAlBi Alloy during Heating Process after Cryogenic Treatment
深冷处理后铜铝铋合金在加热过程中的固态相变
17.
dry process silver film
干法成像处理银盐胶片
18.
from a boned strip of cured loin.
盐渍处理过的带骨腰肉。