说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 缸端盖
1.
Analysis of Cracks Formation on the φ2500 Cast-iron Dryer Cover
φ2500铸铁烘缸端盖裂纹成因分析
2.
Yankee Dryer End Covers Compensated with Sleeved Bar Analysis of Working Stress
大烘缸端盖用套筒拉杆补偿——工作应力分析
3.
Calculation of heat transfer for cast iron dryer head and its analysis on energy saving and consumption reducing
铸铁烘缸端盖散热计算及节能降耗分析
4.
"The cylinder of a steam engine is closed by plates at Both ends, with provision for the piston rod, which is rigidly attached to the piston, to pass through one of the end cover plates."
蒸汽机的汽缸两端都用盖封住,使得与活塞刚性连接的活塞杆穿过盖的一端。
5.
The operation organ of single and dual action have the same cylinder bodies and end shields.
单作用和双作用执行机构具有相同的缸体和端盖。
6.
Position the cylinder heads onto head gaskets and cylinder block.
将汽缸盖安置到汽缸盖罩垫和汽缸体上。
7.
"The cylinder of an internal-combustion engine is closed at one end by a plate called the head and open at the other end to permit free oscillation of the connecting rod, which joins the piston to the crankshaft."
内燃机的汽缸在一端用盖封住,叫做头,另一端敞开,使连接活塞和曲轴的连杆能自由摆动。
8.
A spring on the valve stem tends to hold the valve on its seat (closed). The lower end of the spring rests against the cylinder head.
气门杆上的弹簧使气门保持在气门座上(关闭状态)。弹簧的下端抵在气缸盖上。
9.
a detachable plate that covers the closed end of a cylinder chamber in a reciprocating engine or pump.
覆盖在往复式发电机引擎的汽缸内腔的封闭一端的可分离的盘状物体。
10.
Remove sensor from cylinder hea
从汽缸盖拆下感知器。
11.
Remove cylinder head cover, refer to cylinder head cover removal in this section.
拆下汽缸头盖,请参阅本节中的汽缸头盖的拆卸。
12.
Remove the engine cylinder head from the cylinder block (refer to cylinder head removal in this section).
从汽缸体拆下引擎汽缸盖(请参阅本部分之汽缸盖拆卸)。
13.
The metallurgical quality of cylinder block and head of D114 diesel engine was analyzed.
对D114柴油机缸体、缸盖铸件冶金质量进行了分析。
14.
Like the cylinder block, the head is made from either cast iron or aluminum alloy.
像气缸体一样,气缸盖是由铸铁或者铝合金制成。
15.
The cylinder head is attached to the block with high-tensile steel studs.
气缸盖与气缸体用高强度的钢螺栓缚连结。
16.
RESEARCH ON COMPLEX FOUNDRY TECHNIQUE OF HIGH STRENGTH GRAY IRON FOR CYLINDER BODY & ITS CAP
汽缸体、汽缸盖用高强度灰铸铁的综合铸造技术
17.
The Numerical Simulation of Flow and Temperature Field in Cylinder Head of Diesel Engine with Small Cylinder Bore;
小缸径柴油机气缸盖流场、温度场的数值模拟
18.
Research on Temperature Field Measurement System of Diesel Engine Head and Cylinder Sleeve
柴油发动机缸盖、缸套温度场测试系统研究