说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 直流冷却水
1.
Application of Air-type Siphon Well in Direct Cooling-water System
制气式虹吸井在直流冷却水系统中的应用
2.
Influential rule of cooling water flow on the cooling effect of big bars
冷却水流量对大直径棒材冷却效果的影响规律
3.
Operating Status and Improvement of Valve Inner Cooling Water System in TianGuang HVDC
天广直流阀冷却内冷水系统运行情况及改进
4.
Heat transfer and anti-fouling of liquid-solid two-phase flow in vertical cooling water pipes
垂直冷却水管内液固两相流的传热与抗垢性能
5.
The discussion about the control of marine creature fouling in seawater once-through cooling system
燃气蒸汽联合循环电厂海水直流冷却系统中海生物的控制
6.
The HVDC of Gezhouba-Nanqiao System'Valve Cooling Water System and Relevant Redundancy Modification
葛南直流阀冷却水系统及其控制系统冗余化改造
7.
Numerical Simulation on Liquid-solid Two-phase Flow of Water Cooling Pipe in Blast Furnace Cooling Stave
高炉冷却壁冷却水管内液固两相流的数值模拟
8.
Direct algorithm for simulating cooling effect of water pipes in concrete
模拟混凝土水管冷却效应的直接算法
9.
Adjust cooling flow and water flow (water) according to operating data.
根据操作参数调节冷却水量和水流量。
10.
kept cool or designed to be kept cool by means of water especially circulating water.
通过水尤其是循环的水流而保持冷却或被保持冷却的。
11.
charging/make-up flow [reactor coolant system]
上充/补给水流量〔反应堆冷却剂系统〕
12.
The heated water is thus cooled as it goes through the radiator.
当热水流经散热器时就被冷却了。
13.
For example, cooling water circulate constantly through the tuyere, hearth staves, bosh and inwall cooling plate etc.
例如,冷却水不停地在风口、炉身、炉腹和内壁冷却板等部位循环流动。
14.
Heat Transfer Enhancement of Liquid-solid Two-phase Flow in Cooling Water Pipes of Staves
高炉冷却壁冷却水管内液固两相流强化传热实验研究
15.
Research on Conduction Cooled Binary Current Leads in the Superconducting System;
超导直接冷却二元电流引线特性的研究
16.
Water Cooling or optional oil heating/ cooling of the Rolls where the water or oil flows in spiral channels near the roll surface which gives an extremely efficient cooling/ heating of the rolls and the compound being milled.
水冷却或油加热/冷却方式,是通过贴近辊表面的螺旋型流道来实现的,保证强力的加热冷却效果。
17.
Rules and Process of the GCr15 Bearing Steel′s Through Water Cooling
大直径GCr15轴承钢棒材穿水冷却规律及工艺研究
18.
Cooling Water( 6-10 c)
冷却水(温度6-10℃)