1.
With charger plugged in: Headset Indicator Status
充电器插入时，耳机显示灯状态
2.
Headset Indicator LED-Provides a visual cue about headset status.
耳机显示灯LED ――显示耳机状态
3.
With the headset off, hold the Multifunction Button until the LED remains on (about 3 seconds).
当耳机在关机状态下，按住多功能键三秒钟左右，直至LED显示灯恒亮。
4.
All single boards have indicating lamps to display their running status.
各单板都有显示其运行状态的指示灯。
5.
Show online/offline state
显示联机/脱机状态
6.
display processor status data
显示处理机状态数据
7.
Observe LCD All the single boards have running-state LCDs.
观察指示灯各单板都有显示其运行状态的指示灯。
8.
confirm to pair the Pairing is successful when headset with the phone. the headset indicator flashes rapidly.
设备ID将存储在手机内存中。耳机显示灯将快速闪烁显示耳机配对成功。
9.
Plug the other end of the charger into an electrical outlet. During charging, the headset indicator turns on and remains on until charging completes.
将充电器插入电源中。在充电过程中，耳机显示灯亮起，直至充电完毕。
10.
Any button press on the headset, resets the timer, and the flashing resumes.
按下耳机任意键，重置计时器，蓝色闪烁显示灯恢复。
11.
When the wireless headset is paired to the phone and there is no activity for 5 minutes, the blue flashing LED turns off.
当无线耳机与手机配对后，如果5 分钟都未被使用， 蓝色闪烁LED 显示灯关闭。
12.
Add LED Light for work state and system failure indicator.
增设工作状态指示灯或系统故障指示灯。
13.
The EI displays the machine state of an AP.
EI 显示 AP 的设备状态。
14.
Counters that indicate the status of local and system Very Large memory allocations.
计数器显示本机和系统的大量内存分配的状态。
15.
light to indicate whether power is on or a motor is in operation.
显示能量或发动机是否工作的灯。
16.
Display status~~Displays the score/time in the status bar.
状态栏~~在状态栏中显示得分/时间信息。
17.
The AP Status Page shows the status of the AP-LAN between the APs.
AP状态页显示AP间AP-LAN的状态。
18.
With the DRB read the status of the airbag warning lamp and note the state of it.
用ＤＲＢ读安全气囊警示灯的状态并注意它的状态。