1.
electronic shaft-speed pick-up
电子式轴转速传感器
2.
d range of spindle speeds
主轴转速级数和范围
3.
capstan tachogenerator signal
主导轴转速传感信号
4.
The ratio of the crankshaft to the revolutions of the camshaft is 2∶1.
曲轴的转速与凸轮轴的转速之比是2∶1。
5.
The camshaft rotates in phase with the crankshaft, but at half its speed.
凸轮轴和曲轴协调旋转, 但速度仅是曲轴的一半。
6.
To revolve rapidly about a center or an axis.
转动绕着一中心或轴飞速旋转
7.
"Rotary motion of the transmission main shaft carries through the propeller shaft to the differential, causing the rear wheels to rotate."
变速器主轴的旋转运动通过传动轴传递到差速器上,使后车轮转动。
8.
Modeling and Simulation of Tilting Principal Axis Five-axis High-speed Milling Machine
主轴可转位五轴高速铣床的建模与动态仿真
9.
rotating rapidly about an axis.
围绕一个主轴急速旋转的。
10.
Research on Contact Sealing Tecnology of High Speed and High Temperature Rotary Shaft;
高速高温旋转轴接触式密封技术研究
11.
Comparison of Approximate Calculating Method for Critical Rotating Speed of Stirring Shaft
搅拌轴临界转速近似计算方法的比较
12.
Monitor and Control for Revolution Speed of Spindle Motor Based on PMC Windows Function
基于PMC窗口功能的主轴电机转速监控
13.
MEASUREMENT OF ROTATING SPEED AND AXIAL VELOCITY OF PROJECTILES IN THE BORE OF RIFLED GUNS
测线膛炮弹丸膛内转速并求其轴向速度
14.
Numerical Investigation on Rotating Stall in a Low-Speed Axial Compressor;
低速轴流压气机旋转失速的数值模拟研究
15.
How to Design Two Shaft Gear Reducer in Structure Rapidly;
如何快速设计二级齿轮减速器中转轴的结构
16.
An Analysis on the Uniform Speed Circumrotation of Rigid Body;
从匀速圆周运动谈刚体的定轴匀速转动
17.
A Technomice Method to Rapidly Acquire Bearings Applicable for High Speed Rotor Test;
快速获取高速转子试验用轴承的技术经济方法
18.
"The overdrive is a mechanism interposed between the transmission and propeller shaft to permit the propeller shaft to turn faster than, or overdrive, the transmission main shaft."
超速档是装在变速箱和传动轴之间的一套机械装置,使传动轴比变速器主轴转的更快。