1.
Failure Analysis of Warm Extrusion Die for Magnetism Yoke with Finite Element Method and Structure Optimal Design;
磁轭温挤压模具失效有限元分析及结构优化
2.
Numerical Simulation and Procesee Investigation on Non-Isohtermal Extrusion of TC4 Cup-Shape Part;
TC4杯形件非等温挤压过程数值模拟及工艺研究
3.
A Technique of Isothermal Extrusion Pre-forming and Optimization of Mould Structure for Globoidal Indexing Cams Parts;
弧面凸轮等温挤压预成形工艺与模具结构优化
4.
Warm Extrusion Forming Technology with Multi-direction Load and Die Design for Abnormal-axes
异形轴多向加载温挤压成形工艺及模具设计
5.
FEM Analysis on Warm Extrusion Concave Die of Drilling Bit Shell
凿岩钎头壳体温挤压凹模的有限元分析
6.
Analysis of Alloy ZTC4 Barrel Isothermal Extrusion and Dies Design
ZTC4钛合金筒形件等温挤压工艺分析及模具设计
7.
Effects of Squeeze Casting Die Temperatures and Pressure on Microstructure and Properties of 2024 Aluminium Alloy
挤压铸造模温及压力对2024铝合金组织性能的影响
8.
The act or process of shaping by forcing through a die.
挤压用一模子挤压的行为或过程
9.
To shape(a plastic, for instance) by forcing it through a die.
挤压出用一模子把（如塑料等）挤压成形
10.
Numerical Simulation of Temperature Field of Squeeze Casting of ZA27 Alloy with Large Ratio of Height to Diameter;
大高径比锌铝合金挤压铸造过程温度场数值模拟
11.
Simulation and Optimization of Globoidal Cam Isothermal Extrusion Forming by 3D Rigid-Visco-Plastic FEM
弧面凸轮等温挤压成形刚粘塑性三维有限元模拟与优化
12.
The Finite Element Analysis of the Aluminium Alloy Extrusion in Temperature field
铝合金挤压过程中温度场变化的有限元模拟分析
13.
Assab special steel
冷挤压冲模用特殊钢
14.
Failure Mechanism Analysis of the Cold Extrusion Combination Concave Die and Numerical Simulation of the Extrusion Process
冷挤压组合凹模失效分析及挤压过程数值模拟
15.
die ,extrusion, for extruding presses for the manu-facture of macaroni, spaghetti or the like
挤压模,空心面、实心面或类似食品,挤压机用
16.
Die Structure Optimization and Extrusion Process Research of Equal Channel Angular Pressing
等通道转角挤压模具结构优化及挤压工艺研究
17.
Influence of backward extrusion punch shape to the extrusion process
反挤压凸模形状对挤压成形工艺的影响
18.
Research on Warm Extrusion of Gear Shaft Base on FEM Technology;
基于FEM技术的齿轮轴温挤压成形研究