1.
Tie Rod End Adjusting Sleeve Nut
转向拉杆端调整轴筒螺栓
2.
Analysis on the TSI positioning optimization of 1 000 MW steam turbine
1000MW汽轮机TSI调整轴系定位法优化分析
3.
quick spindle adjustment
(钻床) 快速主轴调整
4.
axle drive pinion adjusting sleeve
车轴传动小齿轮调整套
5.
Improper adjustment of differential bearings.
差速器轴承调整错误。
6.
spring seat bearing adjusting nut
弹簧座轴承调整螺母
7.
wheel hub bearing adjusting nut
车轮毂轴承调整螺母
8.
differential adjusting wrench
分速分速器轴承调整扳手;分速器轴承调整扳手
9.
adjustable self-aligning bearing
可调节的自动调整式轴承
10.
The large scale bend axis piston pump axial setting and pump package centre adjusting method
大型斜轴泵轴线设置与泵组中心调整方法
11.
Adjust the amount of oil supplied to the thread take up and needle bar crank 3 by turning adjust pin 4.
调整挑线杆和针杆曲轴部3的油量时，转动油量调整销4进行调整。
12.
Refer to Drive Pinion Bearing Pre-Load Adjustment.
参阅驱动小齿轮轴承预荷调整。
13.
Knife shaft can be360 degree adjusted by electric control.
刀轴可做360度电动控制相位调整。
14.
"Semifinished main bearings require finishing and fitting after installation, so that the crankshaft must be taken out."
半精加工的主轴承安装后需要修整和调配,这样曲轴就必须拆下。
15.
Gear Box with Eccentric Bearing Jacket and Adjustment of Eccentric Bearing Jacket;
采用轴承偏心套的齿轮箱和轴承偏心套的调整方法
16.
Axial air flow generating fan. Stretch to resize.
用于空气流通的轴向风扇。拉伸可调整大小。
17.
Lubricate adjuster screw threads and pivot with spray lube.
使用喷雾润滑油润滑调整器螺丝螺纹和枢轴。
18.
The adjustment of rotation angle error of power box twin export axles of twin screw extruder
双螺杆挤压机动力箱双输出轴转角误差调整