说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 所需喷到密度
1.
required delivered density
所需喷到密度可燃物包的顶上
2.
The stitch or ‘bight’ as it is usually called can also be altered to close or open out the stitches to the desired width and density.
针迹或通常所说的扣眼锁缝针迹的疏密也可以调节到所需的宽度和密度。
3.
Adjust the strap length as desired.
调整背带到所需长度。
4.
The required encryption driver is not loaded for this system.
所需的加密驱动程序并未加载到系统中。
5.
Lacking the normal or required population density.
人口稀少的缺乏正常的或所需的人口密度的
6.
after reaching the desired velocity the drive is cut off.
推进器在达到所需的速度后关闭了。
7.
Measure Methods of Spray Distribution in Radial Direction of Pressure Atomization Nozzle
压力式雾化喷嘴径向喷淋密度的测量方法
8.
These axons may return in dense formation, and may no longer reach the areas of the brain in which they are needed.
这些轴突可能以更密集的形式再生,也可能长度再也达不到大脑内这些神经元所需要达到的部位。
9.
Timing pumps are set and sealed by regulatory agencies at flow rates required by regulations.
调速泵在调节到所需流速后由受控介质密封和校正。
10.
Your password is protected and can only be used to access the needed resources for the purpose of content indexing.
您的密码受到保护,仅可用于在编制内容索引时访问所需资源。
11.
'you have given Miss Smith all that she required, 'said he; 'you have made her graceful and easy. '
他说:“你给了史密斯小姐所需要的一切,使她的风度变得优雅大方。”
12.
design density of sprinkler system
喷水灭火系统的设计密度
13.
The density P is that of the fluid escaping from the orifice.
上式中p是从小孔喷出的流体密度。
14.
Medium Density Fiberboard Electrostatic Powder Coating Process;
中密度纤维板静电粉末喷涂工艺研究
15.
The time lag can be envisioned as the time required for the liquid propellants to travel from the injector to an effective combustion "front."
可以把迟滞想象为液体推进剂从喷注器运行到有效燃烧“锋”所需的时间。
16.
The unset concrete is simply poured between formwork to the required thickness of the wall, as shown in Fig.3.
如图3所示,只需将搅拌好的混凝土浇注到模板中,达到墙体所需要的厚度即可。
17.
The coatings are sprayed onto the components being analyzed by using aerosol cans or compressed-air spray guns.
涂料是用按钮喷雾罐或压缩气喷枪喷到所要分析的零件上去的。
18.
The force, in gram, required to tear the paper eo a certain length gives the edge tearing strength.
撕到一定长度所需的力量,以克表示,就是它的纸边撕裂度。