1.
"Controllers may be supplied with painted steel floor mounting legs. For base mounting or stainless steel mounting legs, consult the Factory."
可提供配置涂漆钢地面安装支架的控制装置。如果需要底座安装或不锈钢安装支架,请工厂联系。
2.
Mounting the panel model on a short strut has the advantage of decreasing the tare drag of the setup.
把翼段模型安装在一个短支柱上，其优点是减少了安装支架的阻力。
3.
Optimization Design of a Rack for a UAV Electronic Device
某无人机载电子设备安装支架优化设计
4.
Install ABS sensor wires into brackets.
安装ABS感知器线到支架。
5.
Install the rearview mirror on the bracket.
在支架上安装后视镜。
6.
Rear Mount Insulator to Support Bracket
至支撑支架的后安装绝缘器
7.
A metal frame supporting equipment used in outdoor play.
金属支架用来安装室外运动器具的金属支架
8.
outrigger: A framework attached to the shell and used to support the oarlock; also called a "rigger".
舷外桨架：安装在船舷之外支持桨的支架，也称作"外支架"。
9.
Attach belt cover support 1 on the arm.
把皮带护罩支柱1安装到机架上。
10.
Attach belt cover 2 on the arm and the support.
把皮带护罩2安装到机架和支柱上。
11.
Install steering damper onto the axle bracket and drag link.
安装转向阻尼器至轴支架和转向拉杆。
12.
Loosely install the line clamp/holder bolts.
管路扣夹/支架的螺钉不要安装得太紧。
13.
Install the exhaust pipe support and tighten the screw.
安装排气管支架并拧紧螺丝。
14.
Position the fog lamp in the support bracket and install the screws.
将雾灯固定于支撑架上并安装螺丝。
15.
Up to three racks can be mounted to the mast, depending on the option selected.
根据所选择的选件，支架上可安装三个管架。
16.
"If legs were supplied, unpack the legs and mounting hardware."
如果有配置支架,先打开包装,并安装五金构件。
17.
The scaffold is used with all bracing and outriggers in position and wheels locked.
脚手架的所有支撑和外伸支架都要安装就位，所有轮子锁定。
18.
Install cables into the cable bracket and insure retainers are seated in the bracket.
将钢缆安装到钢缆支架且支架中的扣件务必啮合。