1.
Squeeze switch locking tabs inward to release switch from license plate lamp housing.
向内挤压开关锁凸耳，以从牌照灯壳中释放开关。
2.
Position switch into license plate lamp housing and connect switch harness connector.
定位开关到牌照灯壳，连接开关线束接头。
3.
Pry lamp lens from lamp housing.
从灯泡外壳处探测灯的灯罩。
4.
light in a transparent protective case.
有透明保护外壳的灯。
5.
Install bulbs and sockets in the lamp housing.
安装灯泡和插座于灯外壳上。
6.
Pull lens downwarRemove it from lamp housing.
将灯罩向下拉。将其从灯的外壳上拆下。
7.
18W/24W high power LED street light. With metal exterior casing.
高功率LED投射灯，具金属外壳，质感佳。
8.
Classification of degrees of protection provided by enclosures for luminaires
GB7001-1986灯具外壳防护等级分类
9.
Position the lamp housing in the quarter panel and push to engage the grommet.
将灯外壳固定于后侧板并将其推入以啮合套环。
10.
Position dome/reading lamp housing at headliner cavity.
将圆顶照明/阅读灯外壳定位于车顶蓬内衬槽中。
11.
Mine Explosion-proof Light Fixture Shell of Car Processing Design
矿用防爆灯外壳车加工专用夹具的设计研究
12.
Polycrystalline Alumina Ceramic Bulb,the Key of the Development of Ceramic Metal Halide Lamp(Ⅰ)
陶瓷金卤灯发展的关键——多晶氧化铝陶瓷泡壳(上)
13.
"Electric discharge lamp, or vapor lamp: Lighting device consisting of a transparent container within which a gas is energized by an applied voltage and made to glow."
"放电灯,亦称蒸气灯,一种照明器件,由一透明外壳构成,其中的气体被外加电压激发而发光。"
14.
"In an electric incandescent lamp, or lightbulb, a filament is enclosed in a glass shell that is either evacuated or filled with an inert gas."
电子白炽灯(即灯泡)中的钨丝是被罩在一个玻璃壳内,内部抽空空气或灌满惰性气体。
15.
The capacitors are used in discharge lamp circuit operating at50/60 Hz and altitudes up not than2000 m.
外壳采用优质的工程塑料或铝，广泛应用于日光灯、效金属卤化物灯具等。
16.
Table light with hand cut mother of pearl discs; hoop mounted on a three ring steel structure.
采用人工贝壳材质的台灯环绕安置在3个钢圈上。
17.
Hanging light with hand cut mother of pearl discs; hoop mounted on a three ring steel structure.
采用人工贝壳材质的吊灯环绕安置在3个钢圈上。
18.
"On the front of the case, you will find some LED and switch leads"
在电脑机壳正面的面板上通常会有几组指示灯号与开关按钮