1.
Calculation method of the inertia torsion moment of the closed thin wall box beam
闭口薄壁箱梁截面扭转惯性矩的计算方法
2.
A Research on Experimental Error in Measuring Meamoment of Inertia Using Tri-linear Pendulum
三线扭摆法测转动惯量实验误差研究
3.
Error Analysis for Measurement of Missile's Movement Inertia with Torsion Pendulum
扭摆法测量导弹转动惯量的误差分析
4.
Qualitatively, a torque is a "twist".
定性地说，转矩就是扭转。
5.
The most useful characteristics for RMC are pull-out torque, inertia, overall dimensions, and cost of devices.
指出永磁联轴器的重要性能是脱开扭矩、转刚度、动惯性、体尺寸与装置成本。
6.
Exchange of Twisting Moment is Angle of Twint Curve for Cylinder Ipecimen of Plastic Metal with Various Diameter;
不同直径塑性金属圆轴扭转试验的扭矩——扭转角圆的相互转换
7.
ELASTIC FLEXURAL-TORSIONAL BUCKLING BEHAVIOR OF PRE-TWISTED BAR UNDER AXIAL PRESSURE
初始扭转轴压杆弹性弯扭屈曲性能研究
8.
A STUDY ON CORRELATION BETWEEN ANGLES OF TORSION OF FEMORAL TROCHANTER AND NECK
股骨转子扭转角及其与股骨颈扭转角相关性的研究
9.
Discussion on position of optical gate in rotational inertia experiment
扭摆法测量转动惯量实验中光电门摆放位置的探究
10.
Error Analysis of an Inspecting System Based on Torsion Pendulum for Measuring the Rotational Inertia of Projectile
基于扭摆法的弹体转动惯量测量系统及误差分析
11.
Analysis of Dynamic Behaviors of Pile-soil Nonlinear Coupling Torsional Vibration
桩与土非线性耦合扭转振动特性分析
12.
Torsional springs. Torsional springs that are loose and seem to have lost tension require replacement of the complete friction disk.
扭转弹簧:扭转弹簧松弛,似乎失去弹性,需更换整个摩擦盘。
13.
Study on Torsional Vibration Control of a Flexible Bar Using Piezoelectric Torsional Actuator;
压电扭转驱动器及其在柔性杆扭转振动控制中的应用研究
14.
Description of torsional vibration absorber characteristics
GB/T13437-1992扭转振动减振器特性描述
15.
It is hard work to control the workings of inclination and turn the bent of nature.
要控制癖好，扭转天性，是困难的。
16.
Asymptotic Analytical Solution for Torsion Problem of Elasto-Plastic Bar with Strain-hardening
强化材料弹塑性扭转问题的渐近解法
17.
The Performance Analysis of the Antiroli Torsion Bar Spring Installed in High Speed Bogie
高速转向架抗侧滚扭杆弹簧性能分析
18.
Method of Strongly Singular Integral Equation for the Torsion of Cylinder with Edge Crack
边裂纹柱扭转的强奇性积分方程解法