1.
horse shoe washer
开口垫圈,马蹄形垫圈
2.
Washers with split
GB/T851-1988开口垫圈
3.
Flared type tube fittings--Back-up washer
GB/T5652-1985扩口式管接头锁紧螺母垫圈
4.
Washer Fluid Switch Sense (JX Only)
垫圈液体开关感知器（仅是ＪＸ）
5.
Exploitation of Standard Parts of Gasket Based On DCL & AutoLISP;
基于DCL和AutoLISP语言开发的垫圈标准件库
6.
A gasketed connection has four parts: the valve outlet, a nipple, a nut, and a gasket (or washer).
一个衬垫接头有四个零件：一个阀门排气口、一个管接口、一个螺母和一个衬垫（或垫圈）。
7.
Apply silicon sealer/lubricant to the inner and outer diameters of the flange kit gasket, and press the gasket onto the valve body end.
将硅密封/润滑剂施加在法兰组件垫圈的内径和外径上，将垫圈压在阀体端口上。
8.
Washers with ball face
GB/T849-1988球面垫圈
9.
Plain washers--Small series--Product grade A
GB/T848-1985小垫圈--a级
10.
Plain washers--Normal series--Product grade A
GB/T97.1-1985平垫圈-a级
11.
Washers with cone face
GB/T850-1988锥面垫圈
12.
Specifications for spring washers--Single coil spring lock washers
GB/T94.1-1987弹性垫圈技术条件弹簧垫圈
13.
When in place, the gasket will be seated and flush with the valve body ends.
放置好后，垫圈将与阀体连接端口一起固定和冲洗。
14.
A wide range of standard stampings, non-standard products, stainless steel washers, internal/ external teeth washers, rings, circlips for holes, circlips for shaft, other fasteners, fittings, seal washers and clamps主要生产各种标准件冲压件.各种非标产品.
不绣钢垫圈;内外齿垫圈;挡圈;孔用挡圈;轴用挡圈;纱嘴头,其他紧固件、接件密封垫圈卡圈.
15.
Inner sphere washers
GB/T1030-1988内球面垫圈
16.
Plain washers--Large series--Product grades A and C
GB/T96-1985大垫圈-A和c级
17.
Plain washers--Product grade C
GB/T95-1985平垫圈-c级
18.
Plain washers--Extra large series--Product grade C
GB/T5287-1985特大垫圈c级