1.
Valve sticking. Gum or carbon deposits on the valve stem will cause valve sticking. Excessive valve-stem clearance speeds up valve deposits.
气门沾着:气门杆上的胶质或积炭是造成沾着的原因。气门杆间隙过大会加速气门的积炭。
2.
Inspect for scuffed or bent valve stems.
检视气门杆是否擦伤或弯曲。
3.
Analyzing on Damage of Discharge Stem of MAN40/45 Mid-Speed Diesel Engine;
MAN40/45中速柴油机排气门杆损伤分析
4.
Valve Breakage. Any condition that causes the valve to overheat or to be subjected to heavy pounding (as from excessive tappet clearance or from detonation ) may cause valves to Break.
气门破裂:气门过热或遭受重载(气门杆间隙过大或爆裂)均可造成气门破裂。
5.
A spring on the valve stem tends to hold the valve on its seat (closed). The lower end of the spring rests against the cylinder head.
气门杆上的弹簧使气门保持在气门座上(关闭状态)。弹簧的下端抵在气缸盖上。
6.
valve-tappet clearance adjuster
气门挺杆间隙调节器
7.
tappet oil gallery
(气门) 挺杆润滑油道
8.
Install the hydraulic valve tappets.
安装液压气门挺杆。
9.
"After the cam lobe moves out from under the valve lifter, the valve spring forces the valve up onto its seat again."
当凸轮凸角离开气门挺杆,气门弹簧使气门重新回到气门座上。
10.
Valve Lash Adjuster
气门间隙调节器又称液压挺杆
11.
Manual Valve Lever Position Sensor
手动气门叉杆位置感知器
12.
The valve lifter, a round cylinder, rides on the cam.
气门挺杆为一圆筒体，坐落在凸轮上。
13.
The cylinder head carries the valves, valve springs and the rockers on the rocker shaft, this part of the valve gear being worked by the push-rods.
气缸盖携带阀门，气门弹簧和在摇臂杆上的摇臂，这部分的气门传动机构通过推杆工作。
14.
The value-opening mechanism includes a valve lifter and a cam on a camshaft.
一套气门开启机构包括一个气门挺杆和一个在凸轮轴上的凸轮。
15.
"With this arrangement, the camshaft is directly below the valve lifter, and no push rods or rocker arms are necessary. "
"在这种装置中,凸轮轴直接装在气门挺杆下,并且不必有推杆或摇臂。"
16.
Evaluation of the (13)～ C-urea Breath Test in Detecting Helicobacter Pylori Infection;
～(13)C尿素呼气试验检测幽门螺杆菌感染的评价
17.
Coliforms, B. cereus, C. porringers, and Salmonella species have been detected in most spices.
在许多调味品种,检出大肠杆菌,芽样芽孢杆菌,产气荚膜梭状芽胞杆菌和沙门氏菌。
18.
Motor actuators for rising stem valves can be powered by air, gas, hydraulic or electric power.
用于升降阀杆(杆)门的马达执行机构可以采用空气、气、体或电力作为动力。