1.
Optimization of ZG35CrMo Valve Body on Microstructure and Casting Process
ZG35CrMo阀体组织和工艺的优化
2.
Reassemble the check module in the reverse order. Install the check modules into the valve body hand-tight. Replace the cover.
按照相反顺序重新组装止回阀模块。将止回阀模块安装进阀体内，用手紧固。重新安装阀盖。
3.
Submersible Turbine Pump Unit and Its Multi-function Valve Assembly
潜油涡轮泵机组及其多功能阀体总成
4.
Integral Yoke &Bonnet: Some designs incorporate a twopiece bonnet and yoke.
整体轭架和阀盖：一些结构有两件式阀盖和轭架组成。
5.
Straight moving type relief valves, mainly valve disc, valve body,, spring-loaded, roof, regulation pole, conditioning nut, and other integral parts.
直动型溢流阀，主要有阀芯、阀体、弹簧、上盖、调节杆、调节螺母等零件组成。
6.
Study on the Microstructure and Performance of Austenitic Valve Steeel by Micro-Alloying;
微合金化奥氏体气阀钢的组织和性能研究
7.
Resultant Evaluation Method Research of Resources and Environmental Attributions for Valve-body Manufacturing Process
阀体制造过程资源环境属性组合评价方法研究
8.
Microstructure and Properties of the Polynary Coatings Co-diffused on Martensitic Valve Steel
马氏体气阀钢多元共渗层的组织及性能
9.
Lift out the disc holder assembly from the body of the valve.
从阀门的阀体内提起阀瓣固定器总成。
10.
The apparatus consists of a bulb of known volume and valve block or manifold.
仪器由一个已知体积的球管和一个阀组或管网所组成。
11.
Slide the other half of the splash guard into the groove on the relief valve body and reassemble the two parts together.
将防溅保护的另一半滑动到安全阀阀体的沟槽上，将两半部件重新组装在一起。
12.
"It consists of a compressor, a condenser, a throttle or expansion valve, an evaporator, and a working fluid (refrigerant)."
它由压缩机、冷凝器、节流阀或膨胀阀、蒸发器,以及一种工作流体(冷冻剂)组成。
13.
Tag location for gate and globe valves is typically on the valve yoke or body/bonnet flange.
闸阀和截止阀的标签位置通常在阀门轭架或阀体/阀盖法兰上。
14.
Improvement for Subcritical 600MW Units Switched over Single Valve to Sequence Valve
亚临界600MW机组单阀切多阀及顺阀运行的完善
15.
Control valves and valve general, the executing agency.
控制阀一般由执行机构和阀门组成。
16.
Pressure governor valve is composed by governing valve, oil, water separation devices and a combination of one-way valves, etc.
调压阀是由调压阀、油水分离器及单向阀等构成的一个组合阀总成。
17.
Study on Structure Property of Superpower Oil Engine Austenite Exhaust Valve Steel-3Cr23Ni8Mn3MoN;
大功率柴油机奥氏体排气阀钢3Cr23Ni8Mn3MoN钢的组织性能研究
18.
Reliability Analysis Research of Check Valve in the Medical and Intelligent Body Fluid Permutation Apparatus;
医用智能体液置换机中组合单向阀的可靠性分析