1.
Principles of Cast Alloy & Melting
铸造合金原理及熔炼
2.
Hydrogen Storage Properties of La_2Mg_(17) Alloy Prepared by a Smelting Method with Protection by Molten Salt
熔盐保护熔炼法制备La_2Mg_(17)合金及其储氢性能
3.
THE STUDY OF REASONABLE SLAG FORM OF JINCHUAN'S NICKELFASH SMELTING PROCESS;
金川镍闪速熔炼炉渣合理渣型的研究
4.
Melting Technology and Composition Control of TA15 Titanium Alloy;
TA15钛合金熔炼工艺及成分优化
5.
Principles of Metal Molten Welding & Technique
金属熔焊原理及工艺
6.
This paper describes the designed features and production practice of the process for reduction smelting of cobalt-copper oxide ore by electric furnace in Cobalt-copper Smelter of the Congo (Kinshasa).
介绍了刚果(金)钴铜冶炼厂电炉还原熔炼处理钴铜氧化矿工艺的设计特点及生产实践。
7.
Investigation on Manufacturius Low Ferronickel from Nickel Laterite Ore by Prereducing-Smelting Process;
红土镍矿预富集—还原熔炼制取低镍铁合金研究
8.
Study on Extracting Ferronickel from Laterite Ores by Electric Furnace Reduction Smelting
红土镍矿电炉还原熔炼镍铁合金的研究
9.
Carbothermal Reduction Process for Production of Coarse Al-Si Alloy
碳电热还原法熔炼一次铝硅合金的反应过程
10.
Flux is associated with alchemical dissolution and disintegration.
暗火与炼金术中的熔解与裂解原理有关。
11.
Research on Magnesium and Magnesium Alloys Melting Protection under the Mixture Gases Containing C_2H_2F_4;
C_2H_2F_4混合气体保护下镁及镁合金的熔炼研究
12.
Study on Feeding Process in CEVM of Titanium and Titanium Alloy
钛及钛合金真空自耗熔炼补缩工艺研究
13.
Closed Integration System for Melting and Pouring Magnesium Alloy
封闭式镁合金熔炼及浇注集成系统的研究
14.
The melting microstructure and properties of Ni-graphite self-lubricating alloys
Ni基合金-石墨自润滑材料的熔炼组织及性能
15.
Mining industry: metal melting( transportation and circulation of electrolyte); washing of liquid waste.
矿业：金属熔炼（送及循环电解液）废液的洗涤处理。
16.
Adopting rational melting process and proper carbon equivalent as well as inoculation process is the precondition to improve the metallurgical quality of castings.
采用合理的熔炼工艺、选择合适的碳当量及孕育方法是提高冶金质量的先决条件。
17.
The Investigation on the Microstructure and Wear Mechanism of In-situ Synthesis TiC-TiB_2 Particulates Reinforce Metal-matrix Composite Coatings by Gas Tungsten Arc Cladding
氩弧熔覆原位合成TiC-TiB_2增强金属基复合涂层及其磨损机理研究
18.
Numerical Simulation of the Temperature Field during Aluminum Melting Process
铝熔炼过程合金熔体温度场的数值模拟