1.
Principles of Metal Molten Welding & Technique
金属熔焊原理及工艺
2.
parent metal fusion
焊接基体金属的熔化
3.
Impact of Physical Properties of Dissimilar Metal on Laser Welding Pool
异种金属物理性质对激光焊接熔池的影响
4.
Investigation on Properties of Deposited Metals by Shielded Metal Arc Welding Process D172;
D172焊条电弧堆焊熔敷金属性能研究
5.
To solder(two pieces of metal)together using a hard solder with a high melting point.
硬焊用高熔点的硬质焊锡将（两块金属）焊在一起
6.
electrode ,of base metal, coated or cored with flux, for soldering, brazing or welding
焊条,贱金属制,外涂或内心装有焊剂,用于软焊,硬焊或熔焊
7.
With the result the coating projects beyond the molten end of the electrode metal.
结果药皮伸延于焊条金属芯熔端之外。
8.
Ti content on diffusible hydrogen of deposited metal of flux cored wire
钛对药芯焊丝熔敷金属扩散氢的影响
9.
Study on the Submerged Arc Welding Consumables for 2.25Cr-1Mo-0.25V Steel and Its Microstructure and Mechanical Properties of the Deposited Metal;
2.25Cr-1Mo-0.25V钢埋弧焊焊材及熔敷金属组织性能研究
10.
Study on Microstructure and Property of Deposited Metal Prepared by Electrode CHR132 and CHR172;
焊条CHR132和CHR172堆焊熔敷金属组织及性能研究
11.
Study on Fusion Welding Technique to Dissimilar Alloys of Magnesium Alloy and Aluminum Alloy;
异种金属镁合金和铝合金熔焊工艺研究
12.
Investigation on Solidification Cracking Susceptibility of 690 Nickel-based Welding Strip Surfacing Metal;
690镍基合金焊带熔敷金属结晶裂纹敏感性研究
13.
Cerium Oxide Influence upon Low Alloy Steel Electrode Deposited Metal
氧化铈对低合金钢焊条熔敷金属的影响
14.
metal(lic) bath
金属熔池，金属熔体
15.
Microstructure and properties of dissimilar metals TIG welding-brazing joint of aluminum alloy to stainless steel using Al-Si flux-cored wire
铝合金与不锈钢异种金属铝硅药芯焊丝TIG熔钎焊接头组织及性能
16.
preparation of base metal for welding
焊接基体金属的处理
17.
THE FORECAST AND CONTROL OF THE AMOUNT OF DIFFUSION HYDROGEN IN THE DEPOSITED METAL OF BASIC ELECTRODES
碱性焊条熔敷金属中扩散氢的予报及控制
18.
Study on Ductility Dip Cracking Sensitivity for Incone1690 Electrode Filler Metal;
Incone1690焊条熔敷金属高温低塑性裂纹敏感性研究