1.
Supplies the required 5 volt power source to the crankshaft position sensor, camshaft position sensor, MAP sensor and throttle position sensor.
向曲轴位置感应器、凸轮轴位置感应器、MAP感应器以及节气阀位置感应器提供所需的5伏电压。
2.
The camshaft position sensor is located in the distributor on all engines.
在所有的引擎中，凸轮轴位置感知器位于分电盘内部。
3.
cam shaft driving gear
凸轮轴传动齿轮凸轮轴传动装置
4.
As the camshaft rotates, the lobe, or high spot of the cam, pushes against parts connected to the stem of the valve.
当凸轮轴旋转时，凸轮凸起的或者高点的位置，推动气门座。
5.
cam shaft drive
凸轮轴传动凸轮轴传动装置
6.
overhead camshaft engine
上置式凸轮轴发动机
7.
cam shaft reversing lock
凸轮轴换向闭锁装置
8.
In addition, when the camshaft is located over the cylinder head, the arrangement is known as an overhead camshaft( OHC) design.
另外，当凸轮轴位于汽缸盖上面时，这种方式被称为是顶置凸轮轴(HC)构。
9.
overhead cam shaft
上凸轮轴上部凸轮轴
10.
As the camshaft continues to rotate, the high spot moves way from the valve mechanism.
因为凸轮轴继续旋转，凸轮轴上的凸起部分离开气门装置。
11.
camshaft(journal )turning lathe
凸轮轴（轴颈）车床
12.
Close the pivot cover and move the rear wiper blade to the Park position on the ramp.
关闭枢轴盖且移动后雨刷片至在凸轮滑道park（停止）位置。
13.
The fast-idle cam position is controlled by an arm on the choke shaft.
快怠速凸轮的位置是由阻风门轴上的杆臂控制的。
14.
New Mitsudishi 5-Valve DOHC Engine
三菱新型顶置双凸轮轴5气门发动机
15.
"The cam lobes are so positioned on the camshaft as to cause the valves to open and close in the cylinders at the proper time with respect to the actions taking place,in the cylinders."
曲轴上凸轮凸角的位置使气门在恰当的时侯开关,以便与气缸的工作顺序相一致。
16.
cam shaft displacement control for reversing engines
可倒转发动机的凸轮轴位移控制器
17.
The camshaft also fits inside the block, except on overhead-cam engines( OHC).
除了顶置凸轮(HC)动机以外，凸轮轴都安装在气缸体里面。
18.
The camshaft has a cam, on which there is a lob, or bump.
凸轮轴上有一个凸轮，凸轮上有一个凸角。