1.
slave cylinder piston return spring
工作缸活塞回位弹簧
2.
The returning force of the thread take-up spring is insufficient.
挑线弹簧的回复力过强。
3.
hydraulic relay valve return spring
液压式继动阀回动弹簧
4.
Modular check construction featuring nonreversible checks with captured springs for simplified servicing.
模块化止回阀结构特点在于不可逆止回，配置简化维修的复位弹簧。
5.
landing gear downlock spring
起落架下位锁锁定弹簧
6.
adjustable spring gauge
可调式弹簧定位装置
7.
Rear spring center bolt not in seat.
后弹簧中心螺栓不到位。
8.
"After the engine starts and the ignition key is released, spring pressure returns it to the ON position."
发动机启动以后,点火钥匙回转,在弹簧的压力下,恢复到"开启"位置。
9.
A spring attached to each brake shoe returns it also to its original position, free of the brake drum.
附接在各个制动蹄上的弹簧也将制动蹄拉回原位，不与鼓轮接触。
10.
The springs in seats and beds are made of coils of wire. The wire is springly and bends when pressed, but when the press is lifted.it springs back into position again.
座位和床上的弹簧是用钢丝圈制成，钢丝有弹性一压就弯，但是一没了压力，钢丝重新弹回去。
11.
On Dynamic Plastic Failure of the Restoring Spring of a Missile Projector;
弹射挂弹机构复位弹簧动塑性失效分析
12.
"The upper end rests against a flat washer, or spring retainer, which is attached to the valve stem by a retainer lock (also called a keeper)."
上端抵在弹簧座上,在弹簧座的下面用栓销(或叫做定位销)加以定位。
13.
Stress analysis of constant hanger arms
核级恒力弹簧吊架回转臂的应力分析
14.
Quantitative Analysis on the Principle of Hot Shape Correction of Plate Spring under Bending and Unbound;
钢板弹簧弯曲回弹热校形规律的定量分析
15.
UNIMATIC DRUCKLUFT FLUESSIGKEITSTECHNIK GMBH offer to you Pneumatic components and Hydraulics elements in addition also Info on Gas springs.
公司提供气体弹簧、气压减振和弹簧以及座位范围内的可行性方案。
16.
The assembly shall consist of two threaded-in check modules with captured springs and silicone seat discs.
这种总成应该由两个螺纹旋进、配置复位弹簧和硅酮阀座阀瓣的止回阀模块构成。
17.
AXIAL COMPRESSIVE STIFFNESS OF CYLINDRICAL,CONICAL AND LOOPED CARBON-TUBE NANOSPRINGS
圆柱、柱锥及回形碳管纳米弹簧的轴向刚度
18.
Represents a spring return (break). Right-click to open and close the circuit.
表示弹簧复位（断开）。右击断开或接通电路。