1.
A Study on Function-Oriented CAD of Panel Trimming and Punching Die Design;
面向功能的覆盖件修边冲孔模CAD系统的研究
2.
NC Machining Process of Trimming-Punching Die for the Right/Light Middle Door Chute Strength Plate
左/右中门滑道加强板修边冲孔模的数控加工工艺
3.
shaving allowance
(冲压用语) 修边余量
4.
Instantaneous Clearance of Ordinary Punching and Precise Punching Without Burr and Its Influence on Punching Quality
普通冲孔与无飞边精密冲孔的瞬时间隙及对冲孔质量的影响
5.
Plan of Scrap Iron Treatment of Cold Stamping and Trimming Die for the Auto-Cover
汽车覆盖件冲裁修边模铁屑处理方案
6.
Research on the Instantaneous Clearance and the Plastic Status to the Precise Punching without Burr
精密无飞边冲孔瞬时间隙及塑性状态研究
7.
A device which can fulfill punching, flanging and thickening in one stroke of press machine is studied.
研制了可在压力机一次行程中实现冲孔、边和增厚边缘的装置。
8.
The Automatic Production about Automotive Panel's Stamping Direction and the Inside Hole Repairing Based on ACIS;
基于ACIS的车身覆盖件冲压方向自动生成及内孔修补
9.
A device to thicken edge of pre-punching hole on blank is also developed.
还研制了在板坯的预冲孔上增加边缘厚度用装置。
10.
Research on Technologic Experiment about Edge Quality of Small-deep Hole Finished by Pulse Electrochemical Technology
基于脉冲电化学光整加工技术的深小孔棱边质量实验研究
11.
Research on Formability of Aluminum Alloy Flanged Hole by EMF
基于磁脉冲技术的铝合金板材圆孔翻边工艺研究
12.
The crack between the coped and hole was removed by air arc and then repaired by welding.
在修割边和钻孔之间的裂纹用气弧消除，然后进行焊补。
13.
A rough edge or area remaining on material, such as metal, after it has been cast, cut, or drilled.
毛口，毛头被切割、冲削或钻孔后留在原材料如金属上的粘糙的边或面物质
14.
lagging edge
【电】(脉冲的)下降边
15.
multi-aperture pulse distributor
多孔磁心脉冲分配器
16.
rotary wash-boring equipment
旋转式水冲钻孔设备
17.
sidepiercing cam actuated die
侧楔作用侧向冲孔模
18.
Weld identification single hole punch.
鉴别焊缝的单孔冲压机