1.
The movable parts of the disc are fitted separately from the sealing parts.
闸板上可活动的部件与密封部件分开固定。
2.
Water seal of high temperature resisting material isolates spring working parts from water during relief.
在泄压时,耐高温材料的水密封部件将水与其它活动部件隔离开来
3.
"Gaskets are also used to seal joints between other parts, such as between the oil pan, manifolds, or water pump and the Block."
密封垫也同样用于密封其它部件之间的接合处,例如,油底壳、歧管、水泵与气缸体之间的密封。
4.
the seal of the air-balancing cylinder adopts multi-stage seal;
气平衡缸密封部位采用多级密封装置 ;
5.
encapsulated fuel unit
加密封套的燃料元件
6.
The valve is made up of body disc, axle, seal, actuator etc.
扇形闸门由本体、扇形闸板、轴、密封副、执行机构等部件构成。
7.
Analysis of Fem and Sealing Characteristic in the Key Components of HVD
液体粘性调速离合器关键部件有限元及其密封特性分析
8.
Investigation on the effect of eccentricity the symmetric attribute of plutonium material in Sealed container
密封容器中钚部件偏心放置对对称性判断的影响研究
9.
Effect on Symmetric Attribute for Eccentricity of Plutonium Material in Sealed Container
密封容器中钚部件偏心放置对对称性判断的影响
10.
The software and hardware design of remotely controlled sealing and unsealing of plugging module
封堵模块遥控密封和解封的软硬件设计研究
11.
Sealing ring is fitted on pump body, while impeller sealing ring is an optional part.
设有泵体密封环，而叶轮密封环为可选用件。
12.
Research on Assembly Reliability and Sealing Properties of the Bearing Sealed Ring;
轴承密封件安装稳定性与密封特性研究
13.
Analysis of Seal Rings Nonlinear Distortion and Seal Capability of Bearing;
密封件非线性变形与轴承密封性能研究
14.
Finite Element Analysis on Rubber Sealing Y-ring in the Condition of Static Seal
静密封条件下Y形橡胶密封圈有限元分析
15.
marine end-sealed airtight-sliding door
船用端部密封式气密滑动门
16.
Notes: Major parts of the valve series and materials of sealing surface differ according to actual working condition and custmer's special requirement.
注：系列阀门主要零部件及密封面的材质可根据实际工况条件或用户特殊要求设计选用.
17.
Effect of Hydrogen on the Reliability of Microelectronic Devices
氢对金属封装密封元器件可靠性的影响
18.
Development of Anti-aging Coating for Rubber Parts of Armored Equipment
装甲装备橡胶密封件抗老化封存膜的研制