1.
Analysis of Checkout Error for Distortion and Flexure Caused by Tapers of Crank Bore and Piston Pin Eye
连杆孔锥度造成的弯曲及扭曲检验误差分析
2.
aluminum link capsule gun
连杆式铝质弹壳射孔器
3.
Connecting rods are re-bushed and bored and/or honed to suit gudgeon pin clearances.
根据与曲轴针连接接缝尺寸要求，重新对连杆小孔上套，镗孔，研磨。
4.
The Experimental Research on High-Speed Machining Surface Quality of Aluminum Alloy Holes
铝合金连杆大端孔高速切削表面质量的试验
5.
nuts of an anchor
有杆锚杆孔上下的杆箍
6.
a round-headed bolt for timber; threaded along part of the shank; inserted into holes already drilled.
加工木料用的圆头螺栓；部分连杆有螺纹；可以插入事先钻出的孔中。
7.
The deformation matrix method is a fast and available method to calculate surface deformation of connecting rod bearing bore.
变形(柔度)矩阵法计算连杆轴承孔表面变形快速、有效；
8.
The Modification of Drill Machine Tool and Reaseach of Process Technics to Gun Drilling and Gun Reaming;
改造连杆螺栓孔枪钻组合机床和对枪钻铰工艺研究
9.
New Technics of Screw of the Alloy Steel Linked Shank and Design of the NC Assembled Machine
合金钢连杆螺孔窝加工新工艺及数控组合机床设计
10.
A rod or lever transmitting motion in a machine.
连杆机器中传递运动的连杆或杠杆
11.
Disconnect stabilizer bar links at the axle.
断开车轴上稳定杆连杆。
12.
Variation laws of connecting rod curves for five bar and similar four bar mechanism
类四杆五杆机构连杆曲线的变化规律
13.
bar actuated pressure vent
杆式驱动液压排出孔
14.
Install connecting rod bolt protectors on rod bolts.
在连杆螺栓上安装连杆螺栓保护件。
15.
The rod-bearing cap attaches the connecting rod to the crankpin.
连杆轴瓦盖将连杆安装到曲轴销上。
16.
A pole connecting the rear axle of a vehicle with the front.
连接杆连接车辆前后轴的杆
17.
The Analysis of the Points Paths on Link of Plane Five-bar Linkages;
平面五连杆机构连杆上点的轨迹分析
18.
A beam that connects the piston rod to the connecting rod of a reciprocating engine.
十字头连接活塞杆和往复式发动机连杆的横杆