1.
Very low viscosity, Unfilled clear epoxy resin casting or impregnating material, has excellent physical and electrical properties.
无填充料、透明、低粘度的环氧树脂灌注材料，具有优良的物理、气性能。
2.
Unfilled clear epoxy with low viscosity for general purpose casting and impregnation, exhibiting excellent electrical and physical properties.
无填充料的环氧树脂，透明，低粘度，通用的涂覆灌注材料，有着优秀的物理及电气性能。
3.
To stuff, as for roasting.
填充填料，可供烤炙
4.
mechanical properties and interfacial interaction of polyamide 6 filled with CaCO3 modified by coupling agents and acrylaniide AAM surface Polymerization through Ultraviolet Irradiation;
表面光聚合处理无机填料及其填充尼龙6体系结构与性能的研究
5.
Study on Ion-exchange Packing Materials in EDI Stacks and the Packing Forms;
EDI膜堆填充材料及其填充方式的研究
6.
calking compound, synthetic rubber base, wooden deck seam application
木甲板合成橡胶填充料
7.
permeability of tunnel fill material
炮眼充填材料的渗透率
8.
pack the wall cavity with insulation
用隔热材料填充壁腔.
9.
The Crack Propagation and Fracture Behavior for the Composites of Polypropylene Filled with Inorganic Particles;
无机粒子填充聚丙烯复合材料的裂纹扩展和断裂行为研究
10.
Study on the Preparation and Propeties of the Degradable Films from PE Filled with Talcum and Bentonite;
两种无机粉体填充聚乙烯制备复合降解塑料的研究
11.
Experimental and Clinical Studies on the Xenogeneic Acellular Dermal Matrix as Soft Tissue Substitute;
异种无细胞真皮机质作为软组织填充材料的实验及临床应用研究
12.
Quantitative Description of Microstructure of Inorganic Nanoparticles Filled Polymer Composite Materials
无机纳米粒子填充聚合物复合材料微观结构定量描述
13.
there was not enough fill for the trench.
没有足够的填料填充沟渠。
14.
Investigation about Composite Filling and Pre-grouting Material and Spreading Theory;
复合充填注浆材料与扩散充填注浆理论的研究
15.
Study on Structure and Properties of Carbon Fillers Filled PVDF Composites;
碳系填料填充PVDF复合材料结构与性能研究
16.
Study on properties of PTFE composites filled with different organic fillers
不同有机填料填充PTFE复合材料性能的研究
17.
The contents of the experiment included the measurement of the physical characteristics of filling aggregate and the test for the mixture ratio of cemented backfilling materials.
试验内容包括充填骨料物理性能测定和胶结充填材料配比试验。
18.
Fillers include modifiers, extenders, plasticizer and low friction additives.
填料包括改性剂，填充剂，增塑剂和低摩擦添加剂。