1.
Pressure Testing Radiator Pressure Cap—Typical
压力测试散热器压力盖—典型的
2.
"Use care when removing a pressure-type radiator cap, especially when the engine is hot."
拆卸压力式散热器盖时要小心,尤其在发动机处于热态时,更是如此。
3.
oil cooler access cover
通机油散热器的舱口盖
4.
Study on Structural Techniques of the Sealing Plate;
热水器压力罐不锈钢压盖的结构工艺性研究
5.
Attach pressure tester77( or an equivalent) to the radiator filler neck.
将压力测试器7700（等效产品）至散热器填注颈。
6.
With heater control unit in the HEAT position, operate engine with radiator cap in place.
让暖器控制装置在HEAT位置，盖好散热器盖，操作引擎。
7.
With the heater control unit in the HEAT position, operate engine with coolant tank cap tightene
让加热器控制单元处于HEAT（加热）位置，旋紧冷却剂贮藏箱填压力/排气盖之后操作引擎。
8.
Radiator Upper Isolator to Radiator
散热器绝缘体至散热器
9.
Simulation and Optimization of the Length of Radiator Wing and the Influence on Heat Dissipation
散热器翅片长度对散热能力影响的仿真研究
10.
Heat sink for power semiconductor device
GB/T8446.1-1987电力半导体器件用散热器
11.
Set the machine pressure at such that ink covers the fibers well.
设置机器压力使油墨能充分覆盖布料。
12.
DO NOT LOOSEN THE RADIATOR DRAINCOCK WITH THE SYSTEM HOT AND PRESSURIZESERIOUS BURNS FROM THE COOLANT CAN OCCUR.
切勿在系统发热且存在压力的情况下拧松散热器排放孔，否则会被冷却剂严重烧伤。
13.
Thermal Cycling Simulation of Die Casting Die for Aluminum Alloy Speed Governor Cover
铝合金调速器盖压铸模具热循环的数值模拟
14.
The Study on Temperature Rise of Natural Oil Circulation Power Transformer with Pannel-Type Radiator;
片式散热器自然油循环变压器温升研究
15.
Radiator fins plugge
散热器散热片堵塞。
16.
Numerical Simulation of Electric Power and Electronic Equipment Radiator;
电力电子设备水冷散热器的数值模拟
17.
Design of Clutch and Brake of Hot-die Forging Press
热模锻压力机离合器和制动器的设计
18.
Experimental Investigation of Thermalsiphon Radiator for Refrigerant R600a;
R600a在重力热管散热器中的工作实验研究