1.
Condenser-to-Radiator Mounting Brackets
冷凝器至散热器固定托架
2.
If equipped with air conditioning, separate the radiator from the A/C condenser by removing the condenser-to-radiator mounting brackets.
如装备空调，拆卸冷凝器到散热器的固定支架，从而把散热器从A/C冷凝器中拆除。
3.
Install caliper over rotor and into mounting bracket.
在转子上方安装夹制器至固定托架中。
4.
RADIATOR SUPPORT (RIGHT SIDE)
散热器支架（右侧）
5.
stationary non-instantaneous electric water heater
固定非即热式电热水器
6.
Reinforcement brackets are retained on frame sills with 4 studs.
用4个螺椿将加固托架固定在车架梁上。
7.
While the benefits of overheating are specific to the module, the cost-heat buildup-is cumulative to the rack that the module resides in, which has a fixed heat dissipation rate.
过热的副作用具体到模块（装备），热量的消耗、产生和堆积在机架的内部有一个固定的散热率。
8.
gimbaled geophone
万向架固定式检波器
9.
Test method of thermal output of heat emitter
GB/T13754-1992采暖散热器散热量测定方法
10.
screw a bracket to the wall
用螺丝把托架固定到墙上
11.
fixed tube sheet type heat exchanger
固定管板式热交换器
12.
For fixing a pipe ,use saddles to fix the pipe to mortar roundation as below.
管路的固定可如下图使用固定托架在灰浆基础地板上固定。
13.
testing method for thermal fixation properties of disperse dyes
分散染料的热固色率的测定方法
14.
Radiator Upper Isolator to Radiator
散热器绝缘体至散热器
15.
Remove the screws that secure the instrument panel wire harness trough to the airbag rear mounting bracket.
拆去固定仪表板线束槽到安全气囊后固定托架的螺丝。
16.
Describes a sleeve type compensator-the self balancing compensator, which can be used in heating networks to eliminate the blind flange force on primary fixing trestles.
介绍了一种套筒型补偿器———自平衡补偿器，它可用在热力管网中消除主固定支架的盲板力。
17.
turbine mixer with stationary diffusion ring
带固定扩散环的涡轮混合器
18.
The standard pipe rack configuration for this drill consists of a long pipe cradle that is fastened to a pair of paral-lelogram- type swing arms.
本钻机的标准管架配置由一个长管道托架组成，该托架被固定在两个平行四边形的旋臂上。