1.
injector hole area
喷嘴孔的通过截面面积
2.
Research about Nozzle Discharge Speed Distribution for Meltblown Model
熔喷模头喷嘴孔流场速度分布的研究
3.
Clean each injector bore at intake manifol
清洁进气歧管上每个喷嘴孔。
4.
Effect of Nozzle Diameters on the Distribution of Bubbles and Mass Transfer in Bubble Columns;
喷嘴孔径对鼓泡床内气泡分散和质量传递的影响
5.
aperture atomizer
喷孔式喷油嘴喷雾器
6.
diameter and number of hole
喷嘴量孔孔径及数目
7.
A perforated nozzle for spraying water from a hose or sprinkling can.
莲蓬式喷嘴一种使水从管子或喷水壶里喷洒出来的有孔的喷嘴
8.
The Technology of Numerical Control Reconstruction on the Injection Nozzle Center Hole and Inner Cone Grinder;
喷油嘴中孔座面磨床的数控改造技术
9.
Technical Report of 625 EDM Machine Specially for Machining of Fuel Spray Nozzle Holes
625喷油嘴喷孔电火花加工专用机技术报告
10.
CFD Calculation of the Two-Phase Flow inside K-Factor Injection Nozzle
K系数喷油嘴喷孔内气液两相流动的三维模拟
11.
Research on Atomization Patterns for Cracks Hole Style Fuel Injection Nozzles
缝隙孔式喷油嘴偶件燃油喷注雾化形态的研究
12.
A Numerical Study on the Process of Cavitation in a Real Diesel Nozzle
柴油机喷油嘴喷孔中空泡形成过程的数值模拟
13.
Experimental Study of Hydrajet Nozzle on Abrasion
水力喷砂射孔压裂喷嘴的损伤试验与分析
14.
Three Dimensional Numerical Simulation of Flow Characteristic in Ultra-multi Hole Injector
超多喷孔喷油嘴流动特性的三维数值模拟
15.
ISA 1932 nozzle
ISA 1932喷嘴
16.
a container with a handle and a spout with a perforated nozzle; used to sprinkle water over plants.
有柄的容器和有穿孔的喷嘴的喷管；用于往植物表面喷洒水。
17.
A high-velocity fluid stream forced under pressure out of a small-diameter opening or nozzle.
喷射流体在压力迫使下从小喷嘴或小孔中喷出的高速流体
18.
Study on Nozzle Wear Mechanism and Drilling Test of Swirling Abrasive Water Jet;
旋转磨料射流喷嘴磨损机理与钻孔试验研究