1.
Manufacture Process and Quality Control of Composites Cover Panel of Wing Fuel Tank
复合材料机翼油箱盖板的制造和质量控制
2.
double-skin pontoon hatchcover
底面铺板箱形舱口盖
3.
Forming technique and design of die for cover board of refrigerator
冰箱中盖板冲压成形工艺与模具设计
4.
"Such as the hood, the fenders, the roof panels, the door, the instrument panel, the Bumpers and the luggage compartment. "
例如,发动机盖板,挡泥板,车身顶板,车门,仪表板,汽车保险杠和行李箱。
5.
The Theoretic Study on Thin-wall Core Cast-in-site Reinforced Concrete Hollow Floor Structure;
薄壁箱体现浇砼空腹板楼盖结构的理论分析
6.
deck securing fitting
甲板绑扎固定用具; 甲板或舱盖上固定集装箱的装置
7.
SMC/DMC molded products: Widely used in electrical field such as bus bar clamp.
广泛地适用于电器制品，防眩板，母线夹，电表箱，井盖等制品。
8.
Numerical Simulation and Parameter Optimization on Forming Process of Inner Panel of Car Luggage;
轿车行李箱盖内板成形数值模拟及工艺参数优化
9.
Study on the Punching Resisting of Thin-wall Core Cast-in-site Reinforced Concrete Hollow Floor System;
薄壁箱体现浇混凝土空腹楼盖板柱体系的抗冲切性能及配筋研究
10.
The FEA and Research of Design Method on Thin-wall Core Box Cast-in-site Reinforced Concrete Hollow Floor System;
薄壁箱体现浇砼空腹板楼盖有限元分析与设计方法研究
11.
Mechanical Optimal Design Based on Quantum-inspired Ant Algorithm
量子蚂蚁算法及其在箱形盖板优化设计中的应用
12.
Peter nailed the cover onto the box.
彼得把箱盖钉在木箱上。
13.
clench planking
盖瓦叠板式盖瓦式叠板
14.
The tank overflowed a little and Thomas hung up the hose and put on the cap and wiped away the splash of gasoline on the rear fender.
油箱里溢出来一点汽油，托马斯把加油管挂好，拧上油箱盖子，擦掉溅在后挡泥板上的汽油。
15.
to nail a lid on a box
把箱盖钉牢（给箱子钉上盖子）
16.
turning-over board
翻箱板，造型平板，底板
17.
coffin annealing
(钢板的) 装箱退火
18.
Carton:Made of light but strong cardboard,or fiberboard with double lids and bottoms,fixed by glue,adhesive tapes,metal bands or wire staples.
纸箱：一般由坚固轻便的硬纸板做成。上下有盖，用脱水固定，胶带封住，用铁皮或起码钉打包。