1.
Remove the upper engine flywheel/converter housing bolts and loosen the bottom bolts.
卸去上端引擎飞轮/转换器壳体螺栓，并拧松底部螺栓。
2.
Bolt, clutch housing M12
M12螺栓，离合器壳体
3.
Bolt, clutch housing 7/16
7/16螺栓。离合器壳体
4.
Clutch Housing to Engine Bottom Bolts
离合器壳体至引擎底部（2）螺栓
5.
Clutch Housing to Engine Mid-Point Bolts
离合器壳体至引擎中点（2）螺栓
6.
Influence of Bolt Pretightening Force to GIS Shell Flange Intensity
螺栓预紧力对GIS壳体法兰强度的影响
7.
Loosen oil pan bolts and remove the front bolt at each side.
松动油底壳螺栓，拆下每一面的前螺栓。
8.
Remove the remaining converter (or engine flywheel) housing bolts.
卸去其他的转换器壳体（或引擎飞轮）螺栓。
9.
Remove the upper flywheel and converter housing bolts and loosen the bottom bolts.
拆卸上部飞轮及转换器外壳螺栓，拧松底部螺栓。
10.
"Bolts,screws & nuts"
"螺栓,螺丝及螺帽"
11.
MECHANICAL PERFORMANCE OF SINGLE-LAYER RETICULATED DOMES WITH SEMI-RIGID BOLT-BALL JOINTS
半刚性螺栓球节点单层球面网壳受力性能研究
12.
The supporting case is the outer enclosure of the gyro component.
支承壳体是陀螺组件的外壳。
13.
"attach each leg to the bottom of the enclosure using the three nuts, bolts, and washers provided for each leg."
将每个支柱联结到外壳底部,对于每个支柱,采用三套螺母、螺栓和垫圈与外壳进行连接。
14.
Application of The bolt stretcher in tightening and disassembling polymer filter
螺栓预拉伸法在聚酯熔体过滤器螺栓装拆作业中的应用
15.
generator terminal stud insulator
发电机线头柱螺栓绝缘体
16.
Throttle Body Mounting Bolts—Engines—Typical
节气阀体固定螺栓—引擎—典型的
17.
Replace the body bolts and tighten evenly.
重新放置阀体螺栓，并均匀紧固。
18.
The shark was threaded into a pipe "T" connection.
一个螺栓体被拧进一个“T”形管接头中。