1.
engine and transmission alignment checking device
发动机和变速器轴线检查仪
2.
Software Development and Mechanics Analysis of Transmission Bearing
汽车变速器轴承受力分析与软件开发
3.
Process Analysis and Designing for Hanging Pressure Production Line of Tractor Transmission Bearing;
拖拉机变速器轴承对压线设计及工艺分析
4.
"Rotary motion of the transmission main shaft carries through the propeller shaft to the differential, causing the rear wheels to rotate."
变速器主轴的旋转运动通过传动轴传递到差速器上,使后车轮转动。
5.
"The overdrive is a mechanism interposed between the transmission and propeller shaft to permit the propeller shaft to turn faster than, or overdrive, the transmission main shaft."
超速档是装在变速箱和传动轴之间的一套机械装置,使传动轴比变速器主轴转的更快。
6.
differential drive shaft coupling
差速器传动轴联轴节
7.
Remove the floor console from the floor pan transmission tunnel.
从底板变速器-传动轴盖板中拆去底板支柱。
8.
The Application of the Convertible Frequency Governor of Alternating Current to the Reform of the Mainshaft Drive System of a Large_size Vertical Lathe
变频调速器在改造车床主轴拖动系统中的应用
9.
Transmission systems― conveys the drive to the wheels. The main components are clutch, gearbox, driveshaft, final drive, and differential.
传动系统-把动力运送到车轮。主要零部件是离合器，变速器，传动轴，主减速器，和差速器。
10.
differential adjusting wrench
分速分速器轴承调整扳手;分速器轴承调整扳手
11.
"This changes the angle of drive and the distance between the transmission and the differential, and the propeller shaft may take care of these two changes."
使变速器和差速器之间的传动角度和距离发生变化。传动轴要能适应这些变化。
12.
The transmission is then moved toward the rear until the main gear shaft clears the clutch disk. It can then be lowered to the floor.
然后,把变速器主传动轴的端部从离合器中抽出,可将其放到地面上。
13.
If the Transmission Control Module, torque converter, or transaxle has been replaced:
如果变速箱控制模组、扭力变换器或传动轴已更换：
14.
electronic shaft-speed pick-up
电子式轴转速传感器
15.
governor upper bush
调速器上部轴承衬套
16.
governor bottom bush
调速器下部轴承衬套
17.
cross shaft reduction gear
交叉轴(传动)齿轮减速器
18.
Improper adjustment of differential bearings.
差速器轴承调整错误。