1.
Research of the Non-Contact Testing Instrument of Flywheel Gear s Contour and Location Error Based on the Virtual Instrument;
基于虚拟仪器的飞轮齿圈形位误差非接触检测仪的研究
2.
flywheel with ring gear
有环形内齿轮的飞轮
3.
Install the pinion mate gears and thrust washers.
安装小齿轮配合齿轮和止推垫圈
4.
primary planet ring
一级行星齿轮轴座圈
5.
neutral layer of flexspline's toothed ring
柔轮齿圈壁厚中性层
6.
Remove Pinion Gear Thrust Washer
拆卸主动齿轮止推垫圈
7.
hopper ring gear
种子筒齿圈，种子筒排种齿轮环
8.
Multi-deformable-body dynamics analysis on the ring gear of planetary gear set
行星齿轮内齿圈的多柔体动力学分析
9.
Excessive distance between pinion gear and flywheel/drive plate gear.
小齿轮和飞轮/驱动板齿轮之间距离过大。
10.
Large Gear Inside the Gear End of the Transformation Hardening Machine CNC
大型齿轮内齿圈端面淬火机床的数控化改造
11.
Rotate the pinion gear several complete revolutions to align the bearing rollers.
转动主动齿轮若干圈以校正轴承滚柱。
12.
straight-cut gear
直齿圆柱齿轮，正齿齿轮
13.
Using a short piece of pipe and Holder 6958 to hold the pinion yoke, or pinion flange, remove the pinion nut and washer.
用短管和托架6958固定小齿轮轴轭或小齿轮凸缘，拆下小齿轮螺帽和垫圈。
14.
burnishing of gear teeth
(齿轮的) 轮齿研磨
15.
Use hammer and brass drift to tap ring gear onto the flywheel.
用锤子和黄铜冲销轻轻敲打环齿轮进入飞轮。
16.
Hold the yoke with Wrench 67Remove the pinion shaft nut and washer.
用扳手6719握住轴轭。拆下小齿轮轴螺帽和垫圈。
17.
spur and helical hobbing machine
正齿轮和斜齿轮滚齿机
18.
increment angle
(圆锥齿轮)齿端角