1.
Install exhaust heat shield, tighten bolts to 11 N·m.
安装排气隔热罩，拧紧螺栓到11 N·m。
2.
Remove exhaust heat shield from down pipe.
从下行管拆卸排气隔热罩。
3.
The basic exhaust system consists of an engine exhaust manifold, exhaust pipe, exhaust heat shield(s), muffler and exhaust tailpipe
基本排气系统包括一个引擎排气歧管、排气管道、排气隔热罩、消音器和排气尾管
4.
Remove exhaust manifold heat shiel
拆下排气歧管隔热罩。
5.
Install exhaust down pipe heat shiel
安装排气下行管隔热罩。
6.
The Estimate of Thermal Conductivity of Thermal Insulating Materials and Its Application on the Exhaust Pipe of Engine;
隔热材料导热系数预测及其在发动机排气管隔热中的应用
7.
The annular space is evacuated and contains multiplayer insulation.
环形空隙被抽空排气，装有多层隔热材料。
8.
Rothemuhle regenerative air preheater
风罩再生式空气预热器
9.
Starter Heat Shield Remove/Install
启动马达隔热罩拆除/安装
10.
Simulation of Stamping for Car-muffler Heat Insulation-cover;
轿车消声器隔热罩冲压成形模拟分析
11.
The optimization and Analysis of Supercharger Cover Topography in Commercial Vehicle Engine
商用车发动机增压器隔热罩形貌优化分析
12.
The Effect of Heat Shield on Temperature Distribution of Rocket Engine Thrust Chamber
隔热罩对火箭发动机推力室温度场的影响
13.
hood having a maxium horizontal side not exceeding 120cm
最大水平面不超过120cm 的排气罩
14.
recycling hood with maximum horizontal side not exceedin 120cm
循环排气罩,最大水平面不超过120cm
15.
The laboratory exhaust system includes exhaust duct works, exhaust fan, laboratory fume hood exhaust, laboratory canopy hood and cabinets needed venting.
实验室排气系统包括排气管路、气风机、验室通风柜管道、验室排风罩和特殊存储柜的排气管道。
16.
Here the air warms up, taking most heat from the sun blinds and is then drawn off by means of mechanical ventilation.
空气在隔层内升温，通过机械通风排走，带走了遮阳叶片上大量的太阳热量。
17.
industrial hood incorporating a fan with maximum horizontal side not exceeding 120cm
工业用排气罩,装有风扇,最大水平面不超过120cm
18.
laboratory hood incorporating fan with maximum horionatal side not exceeding 120cm
实验室用排气罩,装有风扇,最大水平面不超过120cm